About this guide

When you are using the machine, the XCS software may report different types of error messages that can cause the machine to stop processing mid-job. This guide serves as a quick lookup sheet for you to find the guide for every error code you may encounter. 

Note: When the processing is paused, you can resume it by pressing the Button on the machine.

Error code lookup sheet

Error Code Collection M222 

Screenshot	Error Code	Description	Guide Links
	M222 S4	Device moved	https://support.xtool.com/article/1276?from=xTool+S1&url=/product/24
	M222 S7	Start processing without a project file or with the lid opened	https://support.xtool.com/article/1088?from=xTool+S1&url=/product/24
	M222 S9	Flame detected	https://support.xtool.com/article/1277
	M222 S20	The device reached position limits during processing	https://support.xtool.com/article/1278
	M222 S21	Communication exceptions between the Wi-Fi module and the main controller	https://support.xtool.com/article/1279
	M222 S22	Communication exceptions between the laser module and the main controller	https://support.xtool.com/article/1072?from=xTool+S1&url=/product/24

Error Code Collection M363 

Screenshot	Error Code	Description	Guide Links
	M363 S0	Distance measurement exceptions.	https://support.xtool.com/article/1281
	M363 S2	Distance sensor signal exceptions.	https://support.xtool.com/article/1283
	M363 S3	The distance sensor has not been reset.	https://support.xtool.com/article/1284
	M363 S4	Distance measurement exceptions.	https://support.xtool.com/article/1285
	M363 S5	Distance measurement exceptions.	https://support.xtool.com/article/1286

Error Code Collection M53 & Misc

Screenshot	Error Code	Description	Guide Links
	M53 T0	The flash storage encounters an exception or is damaged  SD card exceptions or failure	https://support.xtool.com/article/1287
	M53 C1/C2/W2	Baseplate or riser base exception	https://support.xtool.com/article/1069?from=xTool+S1&url=/product/24
	M53 I0	Light interference detected	https://support.xtool.com/article/1482?from=xTool+S1&url=/product/24
	M53 S0	Access-control key removed	https://support.xtool.com/article/1280
	M53 T0	SD card exceptions or failure; flash storage exceptions	https://support.xtool.com/article/1287
	M53 W0	Laser module overtemperature	https://support.xtool.com/article/1068?from=xTool+S1&url=/product/24
	M3 F5	Flame risk detected	https://support.xtool.com/article/1481?from=xTool%20S1&url=%2Fproduct%2F24
	M8	Motor driver chip errors	https://support.xtool.com/article/1288

Help us improve

If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates. Also, if you find any error code missing from this article, please let us know the error code name.

Still need help?

If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.