Download PDF files (multi-language)

xTool F1 Ultra unboxing and first use

Note: Save the packaging material including the outer box, accessory boxes, and foam, for moving or shipping xTool F1 Ultra in the future. 
Ensure that the inner space of xTool F1 Ultra is filled with the foam boxes for accessories during movement or shipping. Otherwise, the laser module may shift or deviate from its original position, and thus affect its processing capabilities. 

List of items

Unbox xTool F1 Ultra and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

Note: Some packs may come with only one User Manual, which is a combination of the Quick Start Guide and Safety Instructions.

Meet your xTool F1 Ultra

Product structure

Touchscreen controller

■ Up/Down button for laser module: Lifts or lowers the laser module during manual focusing.
■ Framing button: Starts or stops framing.
■ Start/Stop button: Starts or stops material processing.

Nameplate

Specifications

Get the machine ready

1. Pull down the field lens protector to remove it.
   
   Note: If you won't use the machine for a long period of time, you can install the protector back to prevent the field lens from getting dusty. Ensure that the protector is removed every time before you use the machine.
    
2. Insert the key.
   
   Note: The key is used to control the processing and related functions of the machine. For more information on how to use the key, see Operation Access Control.
    
3. Ensure that the emergency stop switch is released. If it is pressed, rotate it to release it.
   
   Note: The emergency stop switch is used to shut off the machine during an emergency. For more information on how to use the emergency stop switch, see Emergency Stop.
    
4. Install the pipe.
    
    
5. Connect the touchscreen controller.
   
   Note: To insert the connector, ensure that the notch at the end faces up.
   
    
6. Connect to a power supply.
   
    
7. Press the power switch to turn on xTool F1 Ultra and set the UI language of the touchscreen controller.
   

Caution: Do not use the emergency stop switch as a power switch.
Use the emergency stop switch only when an emergency occurs. Using it as a power switch to turn the machine on and off may damage it.

Operate xTool F1 Ultra through XCS

For more information on how to operate xTool F1 Ultra by using xTool Creative Space (XCS), refer to the following articles.

For XCS desktop

• Connect xTool F1 Ultra to XCS on the Computer
• Set up xTool F1 Ultra with XCS on the Computer
• Process on Flat Surface with XCS on the Computer
• Start Laser Embossing with XCS on the Computer
• Process a Curved Material with XCS on the Computer

For XCS mobile

• Operate xTool F1 Ultra with XCS on the Mobile Phone
• Operate xTool F1 Ultra with XCS on the iPad

For offline processing

• Start Offline Processing with the Touchscreen Controller

For accessories

• Use the Rotary Attachment with xTool F1 Ultra
• Use the Conveyor to Process a Large Material
• Use the Conveyor for Batch Processing

Operate xTool F1 Ultra through xTool Studio

For more information on how to operate xTool F1 Ultra by using xTool Studio, refer to the following articles.

Use xTool F1 Ultra:

• Connect and Set up xTool F1 Ultra via xTool Studio
• Upgrade the Firmware for xTool F1 Ultra
• (xTool Studio) How to Process on Flat Surface with xTool F1 Ultra
• (xTool Studio) How to Start Laser Embossing with xTool F1 Ultra
• (xTool Studio) How to Process a Curved Material with xTool F1 Ultra

Use xTool F1 Ultra with accessories:

• (xTool Studio) Use Rotary Attachment 2 (RA2) with xTool F1 Ultra
• (xTool Studio) How to Use the Conveyor to Process a Large Material with xTool F1 Ultra
• (xTool Studio) Use the Conveyor for Processing Same Designs in Batches
• (xTool Studio)Start Offline Processing with the Touchscreen Controller