Overview

This guide provides step-by-step instructions on how to connect your xTool device to a Wi-Fi network using xTool Creative Space (XCS). Setting up a Wi-Fi connection enables seamless wireless operation of your xTool device, making it easier to access, control, and manage projects directly from your computer.

Whether you're a new xTool user or need a refresher on Wi-Fi setup, this guide will walk you through each step to ensure a stable connection. Before starting, please make sure you have your USB cable and Wi-Fi network information on hand.

• If you encounter any issues during setup, refer to the troubleshooting section at the end or contact xTool Customer Service for additional support.

Configuration procedure

STEP 1: Connect your laser device to your computer via the USB cable included in your laser device package.

STEP 2: In XCS, establish a connection via USB.

STEP3: In the top-right corner of XCS, click the Gear icon to access the "Device settings" panel.

STEP 4: In the "Basic Info" tab, locate the "Wi-Fi setting" section before clicking on the "Setting" button.

STEP 5: In the Wi-Fi setup interface, select your preferred Wi-Fi network and enter the password.

STEP 6: Click "Next" in the bottom-right corner and await the connection process to complete.

STEP 7: Once the Wi-Fi setup is successful, you may disconnect the USB cable to switch to the Wi-Fi connection.

Troubleshooting

• If Wi-Fi setup fails, refer to the "Troubleshoot Wi-Fi Setup Failure" guide for additional solutions.
• Should the issue persist, submit a ticket via the "Submit a Ticket" button in the "Help Ticket" section below.

For a prompt resolution, please include the following details:

• • Issue description: A detailed explanation of the observed problem.
  • Video evidence: Attach a video demonstrating the issue, where applicable.
  • Troubleshooting performed: Any troubleshooting steps you have already attempted, along with their results.

This information is crucial for xTool technical support engineers to provide timely assistance.

Documentation feedback
Help improve this content by providing feedback. If this content did not meet your requirements, select "No" in the "Was this page helpful?" section below. Include specific details about what was unclear or missing in the pop-up suggestion box. Feedback submissions are reviewed by xTool technical writers to enhance future documentation.