Download PDF files (multi-language)

English_xTool F1 Ultra_Quick Start Guide	Deutsch_xTool F1 Ultra_Kurzanleitung	Español_xTool F1 Ultra_Guía de inicio rápido
Français_xTool F1 Ultra_Guide de démarrage rapide	Italiano_xTool F1 Ultra_Guida rapida	Nederlands_xTool F1 Ultra_Korte handleiding
Português_xTool F1 Ultra_Manual de referência rápida	日本語_xTool F1 Ultra_クイックガイド	한국어_xTool F1 Ultra_빠른 시작 가이드
繁體中文_xTool F1 Ultra_快速入門指南	简体中文_xTool F1 Ultra_快速使用指南

xTool F1 Ultra unboxing and first use

List of items

Unbox xTool F1 Ultra and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

	xTool F1 Ultra
	Touchscreen controller
	Pipe
	Power adapter
	Power cable
	USB cable
	Slatted panel
	L-shaped positioning piece
	Key
	Lint-free cloth
	Screwdriver
	Material pack
	Quick Start Guide
	Safety Instructions

Note: Some packs may come with only one User Manual, which is a combination of the Quick Start Guide and Safety Instructions.

Meet your xTool F1 Ultra

Product structure

Touchscreen controller

■ Up/Down button for laser module: Lifts or lowers the laser module during manual focusing.
■ Framing button: Starts or stops framing.
■ Start/Stop button: Starts or stops material processing.

Nameplate

Specifications

Get the machine ready

1. Pull down the field lens protector to remove it.
   
   Note: If you won't use the machine for a long period of time, you can install the protector back to prevent the field lens from getting dusty. Ensure that the protector is removed every time before you use the machine.
    
2. Insert the key.
   
   Note: The key is used to control the processing and related functions of the machine. For more information on how to use the key, see Operation Access Control.
    
3. Ensure that the emergency stop switch is released. If it is pressed, rotate it to release it.
   
   Note: The emergency stop switch is used to shut off the machine during an emergency. For more information on how to use the emergency stop switch, see Emergency Stop.
    
4. Install the pipe.
    
    
5. Connect the touchscreen controller.
   
   Note: To insert the connector, ensure that the notch at the end faces up.
   
    
6. Connect to a power supply.
   
    
7. Press the power switch to turn on xTool F1 Ultra and set the UI language of the touchscreen controller.
   

Operate xTool F1 Ultra through the software XCS

For more information on how to operate xTool F1 Ultra by using the software xTool Creative Space (XCS), refer to the following articles.

For XCS desktop

• Connect xTool F1 Ultra to XCS on the Computer
• Set up xTool F1 Ultra with XCS on the Computer
• Process on Flat Surface with XCS on the Computer
• Start Laser Embossing with XCS on the Computer
• Process a Curved Material with XCS on the Computer

For XCS mobile

• Operate xTool F1 Ultra with XCS on the Mobile Phone
• Operate xTool F1 Ultra with XCS on the iPad

For offline processing

• Start Offline Processing with the Touchscreen Controller

For accessories

• Use the Rotary Attachment with xTool F1 Ultra
• Use the Conveyor to Process a Large Material
• Use the Conveyor for Batch Processing