Article·5 min
Clean the F1/F1 Lite Field Lens
xTool OfficialIf laser power attenuation occurs, for example, engraved patterns are shallow or materials can't be cut as expected, the field lens may get dirty. Clean it with a lint-free cloth moistened with absolute ethanol.

Step 1: Turn off xTool F1/F1 Lite.
Step 2: Take out the provided lint-free cloth.
Step 3: Moisten the lint-free cloth with absolute ethanol, then gently wipe the field lens to remove any dirt or dust.
Step 4: Turn on xTool F1/F1 Lite and resume processing.
Preview
Was this lesson helpful?
Lesson 3 / 9
Next Lesson
The Cut by F1/F1 Lite Won't Go Through Wood Effectively
5 min
