What You See

When using with your F1 laser engraver, the purifier won't switch to the 'United Mode'.

Why It Happens

It's most likely that the connection cable is inserted into the wrong port.

There are multiple USB-C ports on the devices.

Please make sure the cable is plugged into the correct port as shown below.

We hope this guide is helpful. And we'd love to hear what you think.

If you have any questions, please contact us at: support@xtool.com

Preview

Was this page helpful?

5 out of 7 found this helpful

Help Ticket

Use this help ticket to submit your issue. We will respond within 1 business day