Account Center

Contents

Overview

Features

Safety instructions

Operation process

• Before use
• In use
• After use

Overview

xTool fire safety set is an accessory designed for desktop laser processing machines. With the flame sensors, it can monitor the processing space of a machine and trigger an alarm when a flame is detected.

If the flame is large, it can trigger the action of fire extinguishing, automatically completing the process of flame detection and fire extinguishing. It is applicable to:

• Compatible with xTool D1 series, M1, and Laserbox.
• Compatible with all 455nm blue diode laser or CO2 laser machines that are in a 0.13m³ enclosed space.

*Note that xTool Fire Safety Set cannot guarantee 100% safety in fire accidents. Please use the laser machine according to its guide and do not leave the machine unattended during processing.

Features

• Supporting a maximum closed processing space of 0.13 m³
• Equipped with six sensors, one for detecting flames around a laser module, and the other five for detecting flames in other areas

You can decide how many sensors and where they are to be used based on the processing space of the a laser machine.

• Equipped with a smart switch, used to control the power supply of a laser machine and its accessories
• Providing cable clamps, cable ties, and 3M tape, allowing you to arrange the sensors and connection cables more easily
• Providing three levels of alarms, sending different signals at different levels

In working mode, when a flame is detected, the sensor indicators blink and the buzzer sounds.

1. If the flame is small, the buzzer sounds slowly, triggering an alarm only.
2. If the flame is slightly larger, the buzzer sounds faster, triggering an alarm only.
3. If the flame is large, the buzzer sounds rapidly, triggering an alarm and the action of fire extinguishing.

• Supporting alarm cancellation
• Supporting one-press fire extinguishing

Safety instructions

• The fire safety set cannot extinguish all fires or eliminate the risk of danger. Please strictly follow the safety precautions and instructions for the device to ensure fire safety.
• The fire safety set is applicable only to desktop laser processing devices. Please strictly follow the safety precautions and instructions for the device.
• Check the fire safety set at least once a month, including the sensors, the smart switch, and whether the CO2 gas bottles are tightened.
• The fire safety set is applicable only to closed processing spaces.
• During the release of CO2 gas from the bottles, ice may be formed on the control box and tube.
• If you use a laser device with an air purifier, air assist set, or other accessories, please use an extension socket to connect them all to the smart switch for power supply.
• The fire safety set doesn't work when your device is used with a smoke exhaust system to which the power cannot be supplied through the smart switch.
• Strong light may cause false fire alarms. Do not use the fire safety set in environments with strong light, such as under direct sunlight and infrared light.
• The fire safety set is not applicable to 1064 nm infrared laser modules.
• The fire safety set can work properly at a temperature of 0°C to 35°C and stored properly at a temperature of 0°C to 45°C.

Operation process

For details, please see instructions on this page:

Operation process

For instructions about using Fire Safety Set on your xTool machine, please check the following links:

Use xTool Fire Safety Set on xTool D1 & D1 Pro

Use xTool Fire Safety Set on xTool M1

Use xTool Fire Safety Set on Laserbox Rotary

Check out the Purchase link below if you're interested😊:

https://www.xtool.com/collections/accessory/products/fire-safety-set