Precautions when using xTool D1 LightBurn
Updated Dec 11,2023
Updated Dec 11,2023

1. Setup 

The processing preview (viewing the processing time estimate) function is not working properly. This is because our firmware does not support the LightBurn "read from controller" function for setting parameters.

Menu bar: Edit-Device settings-Additional Settings

The configuration file we provided contains the GCode to turn off the IR so that the D1 automatically turns off the IR when processing. If the you does not use the configuration file, IR cannot be turned off automatically and needs to be set separately. If IR is always on, you can check the GCode setting screen for this line of code.

Menu bar: Edit-Device settings-Additional Settings

Code:M106 S0

When D1 is on and LightBurn is connected to D1, the serial connection is cancelled within the software and the device cannot be reconnected again. Device reboot solves it. Genuine software does not have this problem. Advise users to use LightBurn genuine software

The current position must be used to use the rotation attachment, the coordinate system is not available (it will be misaligned). Ending the use of the rotation attachment requires the operation to return to the origin once

When you set cutting parameters, if you use "fill", "fill + line" mode, you need to open the "overscan" function

 

Turn off the "overscan" effect (edge burn)                                       Turn on the "overscan" effect

                             

 

2. LightBurn software issues

Vector image import exception, belongs to LightBurn itself bug

 

3. Structural issues

The connecting wire is stuck just between the x-axis assembly and the backstop assembly, causing the device to pinch the connecting wire each time it returns to the home point. The thicker connecting wire causes a deviation in the home position each time

 

 

Preview
Was this page helpful?
4 out of 7 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.