Video Overview
Parameter Settings
xTool X1 introduces several new parameters to support its processing capabilities, so its parameter settings differ from those of other xTool devices. For optical results, follow these steps:
- Select the material option that matches your material and use the recommended settings.
- Use the smart optimization feature to refine the settings.
- If the results still do not meet your needs, use a test matrix to find suitable settings. For detailed instructions, refer to Introduction to Advanced Parameters for xTool X1.
1. Smart Optimization
Currently supports only bitmap engraving with the CO₂ laser source, and vector fill and bitmap engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA). For other processing tasks, select the appropriate material and use the recommended settings.
The smart optimization feature provides image-processing and parameter recommendations based on your design and material. You can apply the suggested settings directly to achieve better processing results.
If you want to further improve image quality, you can also use credits to process your images with Atomm.
Example of Using Smart Optimization:

Tips: If you don't know the exact material name, select the material type with the smart optimization feature to get recommended parameter settings.
.gif)
You can also test and adjust the parameters based on your actual processing results. We recommend completing the advanced parameter course before conducting your own tests and following the methods introduced in the course.
2. xTool X1 Exclusive Parameter Overview
2.1 Split Width
Applies to line engraving in Tiled mode, vector fill, and bitmap engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Split Width determines the size of each processing tile. For example, a setting of 20 mm means each tile is approximately 20 × 20 mm.
Adjustment | Effect on Processing Results |
|---|---|
Decrease | Processing depth and clarity within each tile are generally more consistent. |
Increase | Reduces the number of tiles and seams, improving processing efficiency. However, uneven shading or visible seams may appear along tile edges. |
Note: A smaller Split Width is not always better. More consistent results within individual tiles do not necessarily mean fewer seams across the entire image.
2.2 Scan Mode
Applies to vector fill with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Scan Mode determines the laser scanning path used to fill a shape. This setting applies to vector fills, such as solid text and logos.
Mode | Processing Method | Effect on Processing Results |
|---|---|---|
Bi-directional | Fills the shape by scanning back and forth along parallel lines. | Generally faster, but may leave directional line patterns. Seams may also be more noticeable in large filled areas. |
Random | Fills the shape using scattered spiral paths. | Generally reduces directional line patterns and visible seams, resulting in a more uniform surface appearance. However, processing takes longer and may produce distinctive textures. |
2.3 Feather Passes
Applies to vector fill and bitmap engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Feather Passes controls how many passes are used to complete the processing. Its effect varies depending on the processing method.
Processing Method | Effect of Increasing Passes | Effect of Decreasing Passes |
|---|---|---|
Bitmap (e.g., photos) | Distributes processing over more passes, potentially reducing overheating and seam lines caused by heat buildup. Total energy remains largely unchanged, but processing may take longer. | Generally faster, but heat is more concentrated, which may make overheating or line patterns more noticeable. |
Vector Fill + Random Scan | Distributes processing more evenly, potentially reducing localized overheating and uneven line thickness. Total energy remains largely unchanged, but processing may take longer. | Generally faster, but localized heat buildup may become more noticeable. |
Vector Fill + Bi-directional Scan | Adds fill layers in different directions for more complete coverage and smoother edges. Total processing energy also increases, generally resulting in deeper engraving and longer processing times. | Fewer fill layers generally result in shallower engraving and faster processing, but parallel line patterns or discontinuities in thin strokes may become more noticeable. |
Note: In Bi-directional mode, increasing Feather Passes increases processing energy. For bitmaps and Random Scan, increasing Feather Passes mainly changes the processing sequence, while total energy remains largely unchanged.
2.4 Feather Dither
Applies to bitmap engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Feather Dither slightly disperses laser dot positions to reduce visible seams in large-area images. This setting applies to bitmaps only.
Adjustment | Effect on Processing Results |
|---|---|
Increase | Generally reduces visible seams and grid patterns, but may increase graininess and blur details such as small text and thin lines. |
Decrease or disable | Generally produces smoother images and preserves more detail, but visible seams may become more noticeable. |
Note: Feather Dither balances seam reduction against detail clarity. The term "dither" refers to software-based adjustments to laser dot positions, not physical machine vibration.
2.5 Synchronized / Tiled Mode
Applies to line engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Synchronized / Tiled mode determines how the XY axes and galvo work together to process vector lines. This setting applies to vector lines only, such as outlines and line drawings.
Mode | Processing Method | Effect on Processing Results |
|---|---|---|
Synchronized | The XY axes and galvo move simultaneously to process the lines together. | Lines are processed continuously. Actual processing speed and line quality depend on how well the two motion systems work together. |
Tiled | The XY axes move to a designated position and stop while the galvo processes that section. The XY axes then move to the next position. | Makes better use of the galvo's high-speed scanning capability. However, misalignment or visible connection marks may appear at seams, depending on positioning and calibration accuracy. |
Actual processing time and results in both modes also depend on the design and other processing parameters.
These are general trends. Actual results may vary depending on the material, laser source, and other processing parameters.
2.6 Vertical Output / Swing Output
Applies to vector filling and bitmap engraving with galvo laser sources (5W UV, 20W diode, 30W fiber, or 60W MOPA).
Mode | How It Works | Procesing Speed | Recommended Use | Main Benefit |
|---|---|---|---|---|
Vertical Output | The laser beam points straight down. The galvo mirrors do not scan during processing. | Slower | Large-area, single-color processing | Consistent results across the processing area |
Swing Output | The galvo mirrors adjust the laser beam angle during processing. | Faster | Batch processing of small-area designs | Higher processing efficiency |
2.7 Feather power and Feather speed
Applies only to emobossing with a galvo source only (20W diode galvo module, 5W UV galvo source, 30W fiber galvo source, or 60W MOPA galvo source).
These settings control the processing power and speed of the feathering pass in embossing.
Higher power and lower speed reduce seams more effectively but remove more detail. Lower power and higher speed preserve more detail but may leave visible seams.
In embossing, the processing task consists of two stages: main engraving followed by feathering. During main engraving, the device engraves the relief tile by tile using raster scanning. The final feathering pass uses discrete line segments across the entire processing area to reduce seams throughout the design.
Setting Feather power above 0 enables the feathering pass. However, this pass can leave the surface looking rough. On materials such as brass and stone coasters, cleaning can resolve this rough appearance. On materials such as wood and glass, it cannot be avoided, so we recommend keeping Feather power at 0.

2.8 U Split Width
Available only when using a galvo source (20W diode galvo module, 5W UV galvo source, 30W fiber galvo source, or 60W MOPA galvo source) with a rotary attachment.
U Split Width sets the width of each processing segment along the rotary accessory’s U-axis. Adjust this width to improve processing efficiency. If the width is too large, the distance from the focal plane varies more across the segment, making seams more visible. If the width is too small, processing efficiency decreases.

Importance of Cleaning
The galvo system requires clean lenses to ensure stable operation. Regular cleaning is essential.
Operating the device with dirty or contaminated lenses may damage the lenses and reduce processing quality.
Please follow these recommendations:
- Do not disable the lens cleaning reminders. Keep the reminder interval at its shortest setting whenever possible, and perform maintenance as prompted.
- Always turn off the device before cleaning. xTool X1 uses two types of lenses: high-frequency and low-frequency lenses. Clean each lens according to its location.
- Follow the official maintenance guide. Carefully follow the cleaning instructions in this document.
Hybrid Motion: Important Notes
1. Cover-Opening Restrictions During Four-Axis Synchronized Processing
During four-axis synchronized processing, the device must coordinate the movements of the galvo and gantry. To ensure accurate synchronization, the system divides the processing path into smaller segments. The current segment must be completed before processing can be paused.
Therefore, opening the cover directly during processing will cancel the current job.
If the device displays the following cover-opening warning, do not open the cover immediately, as this will cancel the processing job.

2. How to Pause Processing Correctly
If you need to pause four-axis processing, follow these steps:
- Click Pause in xTool Studio.
- Wait for the device to complete the pause operation. The indicator light turns yellow while processing is paused.
- Wait until the indicator light turns green, indicating that the device is ready. You can then open the cover.


3. Processing Modes in Which Opening the Lid Cancels Processing
Opening the cover during any of the following processing modes will cancel the current job:
- Color engraving
- Vector line engraving
- Bitmap engraving
If you need to pause processing or open the cover, always follow the correct pause procedure first.
