This article describes how to creat crafts in Paper Craft mode.
Preparations
๐ You can purchase the processing tools, pens, and materials you need at xtool.com.
- xTool C1 Color Cutter (hereinafter referred to as the xTool C1)
- xTool C1 cutting mat or electrostatic mat
- xTool C1 blade
- xTool C1 fine-point pen
- Cardstock
Procedure
1. Connect xTool C1 and the software
Refer to "Connect xTool C1 to the software" complete the connection.
2. Load the material
Attach the material to the cutting mat or electrostatic mat, then load the cutting mat into xTool C1.
3. Design processing objects
(1) Click Mode and select Paper Craft.
(2) Use the tools in the left pane to design objects.
๐ Note: You can import images, insert shapes, enter text, AI-generated designs, and so on.
4. Set processing parameters
(1) Select the object, set the processing parameters for each one, then click Make.
๐ Ensure that you have set parameters for each object and processing technique.
(2) Click Material, select the material type, then click Apply.
5. Install processing tools and complete the processing
(1) Follow the prompts in the Pre-processing Check section to install the required processing tools. After the processing tool status shows as normal, click Start.
(2) When the interface indicates that processing is ready, press the multifunction button on xTool C1 and wait for the tasks to finish.
(3) (Optional) Follow the software prompts to change the processing tools and complete the remaining tasks.
(4) After all the tasks are finished, click Finished and press the multifunction button on xTool C1 to eject the cutting mat. Then, remove your works.
