This article describes how to connect xTool C1 to xTool software using a USB cable or Wi-Fi.
Download and install xTool software
(1) Download xTool Studio from xtool.com/pages/software.
(2) Double-click the software you've downloaded to install it.

Connect xTool C1 to xTool software
USB connection
(1) Use the USB cable to connect xTool C1 to your computer.
🔔 If the port for your computer is a Type-C port, remove the adapter before inserting the cable.


(2) Open the software on your computer. In the top-right corner of it, click + New project.

(3) On the right side of the software, click + Select device.

Click + Add Device. Select the device to connect.



In the upper right corner of the software, xTool C1 is connected successfully.

Wi-Fi connection
(1) Refer to the USB connection section to connect xTool C1 to the software.

(2) Click
> Configure Wi-Fi to enter the Wi-Fi settings page.

(3) In the Wi-Fi setting dialog box, select or enter a Wi-Fi, enter the password, and click Next.

(4) Click Connect with Wi-Fi to connect your xTool C1 and xTool software through Wi-Fi.
🔔 Ensure that your computer and xTool C1 are connected to the same network.

