This article introduces the camera calibration process for xTool X1. Before calibration, ensure that you've connected xTool X1 with xTool software.

Step 1: Open the calibration page

(1) In the upper-right corner, click the device settings icon.

(2) In the Device settings dialog box, click Calibration.

(3) Click Start next to Camera Calibration.

Step 2: Prepare for calibration

(1) Watch the introduction video and click Next.

(2) Prepare the calibration sheet and masking tape that are included in the xTool X1 package. Then, click Done and Next.

Step 3: Start calibration

(1) Peel off the protective film of the calibration sheet and place it on the baseplate.
Ensure that the upper-left corner of the calibration sheet is aligned with that of the baseplate, and that the edges of the sheet and the baseplate are parallel.

(2) Click Placed in the software.

(3) Close the lid of xTool X1.

(4) Click Measure and press the start/stop button on xTool X1 to start processing.

(5) Wait until the processing and the calibration are done.

(6) Follow the on-screen instructions to remove the calibration sheet.