This article introduces the laser spot calibration process for xTool X1. Before calibration, ensure that you've connected xTool X1 with xTool software.

Step 1: Open the calibration page

(1) In the upper-right corner, click the device settings icon.

(2) In the Device settings dialog box, click Calibration.

(3) Click Start next to Dot Laser Full-Range Calibration.

Step 2: Clear the baseplate

Clear the baseplate of xTool X1 and click Cleared.

Step 3: Close the lid

(1) Close the lid of xTool X1 and click Closed.

(2) Click Next.

Step 4: Wait for the automatic calibration to complete

(1) Wait for the calibration to complete, which takes about 1 minute.

(2) Click Next to finish the whole process.