1. Connect xTool M2 to the software

Go to Operate xTool M2 with xTool Software and follow the steps. Make sure the device is connected successfully.

2. Select the processing mode and material

(1) On the right panel, select Different design - batch processing as the processing mode.

(2) In the pop-up window, click Close.

(3) Under Mode, select the material and click Apply.

3. Place the material

(1) Place the material to be processed on the baseplate.

(2) Close the lid, and the device automatically completes the automation. At this point, the processing background displays in the software.

4. Design a processing object and set parameters

Use the tools on the left side of the canvas to design one processing object on the material.

5. Set variable on an object

(1) On the right panel, click Set variable.

(2) Set the vector status on the right panel. Then click Next.

(3) Click Associate data, and click +Add in batches to add the other objects that you want to process.

Click and Replace vector.

After adding the objects, click Confirm.

6. Edit objects and set parameters

(1) Select objects on the canvas.

(2) Use the tools on the top to further edit the objects and set parameters for them in the right panel.

7. Start processing

(1) Click Next, and sign up or log in to the xTool account.

(2) When you log in, click Next again.

(3) Adjust the bounding box to make it cover the material to be processed. ClickProcess.

(4) The software starts the close-up puzzle automatically, and then starts the batch fill.

(5) When everything is ready, press the button on xTool M2 to start processing.

(6) Wait until the processing is completed.