This article describes how to use xTool automatic conveyor feeder with xTool X1 for processing.
1. Install the conveyor feeder
Refer to xTool X1 Automatic Conveyor Feeder User Guide to install the conveyor feeder.
2. Download xTool software
Visit https://www.xtool.com/pages/software to download the software and install it on your computer.
3. Connect xTool X1 to the software
Refer to Operate xTool X1 with xTool software to connect xTool X1 to the software.
4. Select the processing mode and place the material
(1) Click the current mode, and select Use conveyor feeder.
(2) In the dialog box that is displayed, click Raise base. Wait for the base to raise, and then click Confirm.
(3) Place a material and close the lid of xTool X1.
🔔 Handle the material gently to avoid applying excessive pressure to the conveyor rails.
5. Select the material type and measure the thickness
(1) Click Material, select the desired material type, and click Apply.
(2) Select the pressure level.
If you are processing flexible material, refer to Feed Lead Settings for xTool X1 Automatic Conveyor Feeder to set the feed lead value.
(3) Click 
to measure the material thickness automatically and clamp the material tightly.
🔔 You can click 
to release the material.
6. Shoot the background
Click the Feeder stitching icon, and wait for the background shooting to complete.
7. Design processing objects and set processing parameters
🔔 You can position the designs based on the background shot in step 6.
(1) Use tools in the left side to create objects.
🔔 You can import file, insert shapes, enter text, draw vector graphics, and so on.
(2) Select the objects on the canvas and use the tools on the top to further edit them.
(3) Select the objects and set parameters for them in the right side.
🔔 You need to set parameters for every object. A missed object may fail to be processed. The parameters that can be set for bitmap objects and vector objects are different. You can select multiple objects of the same type and set parameters for them at once.
8. Start processing
(1) Click Process.
(2) On the Check before processing page, click Start. Once the software interface displays Ready, press the "Start/Stop button" of xTool X1 to start processing.
(3) Wait for the processing to complete.
