Download PDF file (multi-language)
Coming soon
Unboxing video
Coming soon
Package list
The package list varies with your device model. For details, visit the corresponding link:
- Package list for the single-UV printhead model
- Package list for the dual-UV printhead model
- Package list for the UV & DT printhead model
Meet xTool O1 Omni Printer
Front view
① Front cover | ② Y-axis motion assembly |
③ ⑰ Magnetic catch | ④ Extension base |
⑤ Start/Stop button (LED indicator) | ⑥ Air duct |
⑦ Height measurement module | ⑧ Top cover |
⑨ UV printhead/DT printhead/None Varies according to the printer mode | ⑩ UV printhead |
⑪ Computer connection port | ⑫ Accessory connection port |
⑬ Right-side panel | ⑭ Slots for waste ink cartridge and moisturizing liquid cartridges |
⑮ Hole for raising the capping station | ⑯ Hole for lowering the capping station |
Rear view
⑱ Rear cover | ⑲ ㉖ Magnetic catch |
⑳ Power port | ㉑ Ink cartridge slots |
㉒ Ink cartridge cover | ㉓ Filter slot |
㉔ Left-side panel | ㉕ Exhaust port |
Product specifications
Product name | xTool O1 Omni Printer |
|---|---|
Product model |
|
Printhead model | Epson F1080 Printhead |
Processing area |
|
Print resolution | 720x1440 dpi |
Ink paths |
RW: rigid white, FW: flexible white, FR: fluorescent red, FY: fluorescent yellow
|
Supported materials |
|
Embossed print height | 7 mm (0.28") |
Vision System Resolution | 1440 x 1200 dpi |
Positioning accuracy | ±0.2 mm |
Automated maintenance | Auto white ink stirring; auto white ink circulation; auto printhead moisture protection |
Supported OS | macOS, Windows |
Main unit dimensions | 28.1" x 14.7" x 18.4" (714 x 374 x 468.5 mm) |
Weight |
|
Indicator description
Indicator status | Buzzer status | Device status |
|---|---|---|
| None | Device not connected. |
| None | Device in sleep mode; maintenance not active. |
| One beep |
|
| None |
|
| Three beeps | A minor error occurred. |
| Continuous beep | A critical error occurred. |
| None | Receiving data; printing supported. |
| One beep | Processing suspended. |
| None | Processing... |
| None | The device is being calibrated. |
| None | Printhead nozzle cleaning in progress; device in maintenance mode. |
| None | Low-power state: The device maintains only periodic automatic maintenance and network connectivity, while peripheral accessories are suspended. |
| None | Upgrading firmware... |
Assemble xTool O1 Omni Printer
1. Preparations
(1) Place the printer on a flat and stable workbench. Ensure adequate clearance at the front, rear, left, and right sides, as shown in the illustration.
Warning: DO NOT place the printer near the edge of the workbench as the front or rear cover may fall when opened.
(2) Remove tape from all sides.
(3) Take accessories and foam padding out from the printer enclosure.
(4) Prepare the printheads.
a. Remove the protective film.
b. Move the printheads to the center for easy access. Remove the tape on both sides of the protective cover.
c. Check the bottom area for any remaining film, and remove it if any.
d. Move the printheads back to place.
(5) Remove the two shipping screws from the extension base.
Use the flat end of the screwdriver.
Magnetic cover installation and removal
Installation
Removal
2. Install the waste ink cartridge and moisturizing liquid cartridge(s)
DO NOT remove the protective film from the back of the moisturizing liquid cartridge(s).
Before installation begins, it is recommended that you wear the nitrile gloves.
Installation preview
Single UV printhead model
Dual UV printhead model
UV & DT printhead model
Installation steps
(1) Open the right-side panel.
(2) Install the waste ink cartridge and the moisturizing liquid cartridge.
You should see this after installation.
(4) Install the right-side panel back.
3. Install the filter
(1) Open the left-side panel.
(2) Install the filter. Note the direction of the filter.
(3) Install the left-side panel back.
4. Install ink cartridges
Warning: Shake the ink well Before installation
Warning: DO NOT remove the protective film under the ink cartridges.
Installation preview
Installation steps
(1) Open the ink cartridge cover.
(2) Install the corresponding cartridges correctly according to your device model.
Insert the ink cartridge, ensuring that the color marking on the cartridge matches that on the corresponding slot.
Press the ink cartridge until you hear a click. Ensure that it stays in place and does not spring back.
(3) Reinstall the ink cartridge cover.
Warning: When removing an ink cartridge, remove it immediately after it is ejected. Do not leave the ejected cartridge in the cartridge slot, as this may cause ink leakage.
5. Connect to a power supply
Keep the device powered for automatic maintenance to work properly.
Warning: Ensure that the power cable does not bend or enter the baseplate's moving area (as shown in the dashed box), and that this area is free of debris.
6. (Optional) Install the exhaust pipe and xTool SafetyPro™ AP2 air purifier
7. Connect to computer
Use xTool O1 Omni Printer
1. Download and install the xTool software
(1) Download the xTool software applicable to the operating system that runs on your computer from https://www.xtool.com/pages/software.
(2) Double-click the software you've downloaded to install it.
2. Connect the printer in the software
(1) Open the software on your computer. In the top-right corner of it, click the + New Project button.
(2) On the right side of the software, click the icon and connect your O1 Omni Printer.
In the upper right corner of the software, you can see that the printer is successfully connected.
3. Complete initialization
Complete initialization as prompted. The whole initialization consists of device calibration, ink filling, and scan alignment calibration.
4. Try printing
Choose a beginner tutorial and follow the instructions to complete your first print.
To know more ...
FAQ
Coming soon
Maintenance
Coming soon
Troubleshooting
Coming soon
