What is laser embossing?

Laser embossing is to use laser beams to carve a design on the material surface. To create a raised effect, the bitmap design is first divided into multiple layers, and then the laser follows specific settings to cut the layers into different depths.

Preparations

1. Connect xTool F2 to xTool Studio

Follow the instructions in Connect xTool F2 to xTool Studio on the Computer.

2. Prepare a design for laser embossing

To laser emboss a material, you need to use a depth map as the processing object.

Depth maps

In 3D computer graphics and computer vision, a depth map is an image or image channel that contains information about the distance of objects from a specific perspective or reference point. Each pixel is assigned a value to represent the distance of that pixel from the reference point, which creates a 3D representation of the scene for its RGB image or virtual scene.

The Stanford Bunny above is a depth map. The white pixels represent the part of the scene that is closest to the reference point, and the black pixels represent the part of the scene that is furthest. In this case, the parts of the scene that are closest are the ears of the bunny. The grayscale gradient in between illustrates that the head, neck, and body are a bit further from the reference point, the legs even further, and the tail of the bunny the furthest before the background, or furthest point of the image. When processing, the dark color is the deep part of the engraving, and the light color is the shallow part of the engraving.

3. Obtain a depth map

You can obtain a depth map from the following channels:

Select a depth map from Elements

On the left side of the project editing page in xTool Studio, click the Elements icon. Scroll down to find Embossment and select a depth map under this category.

Generate a depth map in xTool AImake

(1) On the left side of the project editing page in xTool Studio, click the AI icon.

(2) Select Embossment.

(3) Choose the desired type.

(4) Upload an image, or enter your prompt.

(5) Click the icon to generate a depth map.

Import a depth map

You can download a depth map from the Internet or create one in third-party software, and then import the image to xTool Studio.
On the left side of the project editing page, click the import icon to import a depth map.

Start laser embossing

1. Select the processing mode and material name

(1) On the right side of xTool Studio, click the name of mode, and then select Embossment as the processing mode.

(2) In the top-right corner, click Unknown material, select the name of your material, and click Apply.

2. Place the material and perform laser focusing

(1) Lift the protective enclosure, and place the material on the baseplate, allowing the blue light spot to fall on the surface of the material.

(2) Turn the adjustment button for laser module to lift or lower the laser module. When the red and blue light spots overlap, the focus is successfully set.

(3) After you finish focusing, you can see the measured material thickness in the top-right corner of xTool Studio.

3. Shoot background and import a depth map

(1) In the right corner of xTool Studio, click the Refresh background icon.

(2) Use the methods described in Obtain a depth map to import a depth map.

(3) Resize or move the image. Drag the anchor points of the bounding box to resize the image, and drag the image to move it.

4. Set processing parameters

Select the object on the canvas. On the right side of xTool Studio, set parameters for the object.

• Laser type
• • Blue light is typically used with materials like Tilia wood, corrugated paper, and leather, and for laser cutting.
  • IR is ideal for engraving metals such as stainless steel, gold, silver, copper, aluminum, etc.
• Number of layers
  The more layers you set, the deeper the laser carves into the material surface. Valid value: [1, 256], integer.
• Power (%)
  The power of the laser. The higher the power, the deeper the laser carves into the material surface. Valid value: [1, 100].
• Speed (mm/s)
  The moving speed of the laser dots along the processing path. If the laser dots move slower, the processing time will be longer and the material will absorb more energy. Therefore, the smaller the speed, the deeper the laser carves into the material surface.
• Pass
  The number of times the laser dots pass over the processing path. The more passes, the deeper the laser carves into the material surface. Valid value: [1, 10], integer.
• Lines per cm
  The number of lines engraved within each centimeter. It affects the resolution of the embossing result.
• Engraving angle
  The angle of the laser beams when engraving on the material. This angle is a relative angle between the laser beams and the processing points. For normal operation, it is recommended to set the value to 30.
• Descend at the z-axis
  As the laser carves deeper into the material, the laser beam may be out of focus. By turning on this feature, the laser module will descend at the z-axis, so that the laser beam can keep focusing on the material surface. A focused laser beam produces the highest energy. For materials such as brass that require high laser power, you are advised to turn on Descend at the z-axis for better processing results. In other conditions, if not necessary, you are not advised to turn on this feature.

5. Set the processing path

In the bottom-right corner of xTool Studio, click the arrow icon next to Process to set the processing path.

• Evade smoke: When this feature is enabled, the device follows a path less affected by the smoke to process the material.

• Processing path:
• • Auto planning: xTool Studio automatically plans the processing path based on intelligent algorithms.
  • User defining: Manually set the processing paths for some objects.

6. Preview the processing area

You can preview the processing area on the material by Framing. Framing means laser dots walk along the border of the processing objects on the material.

(1) Click the arrow icon to set the Framing settings.

• Light power: Sets the laser power for framing.
• Mode:
  In the Rect mode, laser dots walk along the rectangle border of the processing objects.
  In the Outline mode, laser dots walk along the outline of the processing objects.
  In the Polygon mode, laser dots walk along a polygonal path formed by connecting the object's vertices.

(2) Click Framing icon in the software. The laser dots will move along the boundary of the processing objects on the material, allowing you to preview the processing area.

To stop framing, click the Framing icon again.

7. Start processing

(1) In the bottom-right corner of the software, click Process.

(2) Check all the precations before processing. Close the protective enclosure of xTool F2. In the right bottom corner of xTool Studio, click Start.

(3) When the software shows “Ready”, press the Start/Stop button on F2 to start processing.

Notes

• After laser embossing a metal, if the processing result has a dark color, you can try laser engraving the work with one more pass.
• Ensure that you use a clear image for laser embossing.