1. Connect xTool P3 to the software
Go to Operate xTool P3 with xTool Software and follow the steps. Make sure the device is connected successfully.
2. Select the processing mode and material
(1) On the right panel, select Same design - batch processing as the processing mode.
(2) Under Mode, select the material and click Apply.
3. Complete the auto mode
(1) Follow the message on the right panel, open the lid again, and the device captures the background automatically.
(2) Close the lid, and the device detects and measures the material automatically.
When the auto mode completes, you can see the background in the software.
4. Design a processing object
Use the left-side tools to create an object and move it over the material.
š” Note: You can import images, insert shapes, enter text, draw vector graphics, and so on. For more information on how to use the software to design objects, see Software Learning Center.
5. Edit objects and set parameters
(1) Select objects on the canvas.
(2) Use the tools on the top to further edit the objects and set parameters for them in the right panel.
š” Note: You need to set parameters for every object. A missed object may fail to be processed.
The parameters that can be set for bitmap objects and vector objects are different. You can select multiple objects of the same type and set parameters for them at once.
6. Start processing
(1) Click Next, and sign up or log in to the xTool account.
(2) When you log in, click Confirm.
(3) Adjust the bounding box to make it cover the material to be processed. Click Process.
(4) When everything is ready, close the lid. Press the knob on xTool P3 to start processing.
(5) After the processing is complete, click Finished.
Services & Help
Learn & Community
Contact Us
Copyright Ā© 2025 xTool All Rights Reserved.