xTool Fire Safety Set Firmware Upgrade Instructions
Updated Dec 21,2023
Updated Dec 21,2023
Preparation
Download V40.201.006.3024.01B1.zip, and unzip it on your local disk (unzipped as below if it's on Windows).
Steps for Windows
Power on the Fire Safety Box (mainboard), and connect it to the computer with the original type-C USB cable.
Right-click on My Computer (or Computer) and select Manage.
Select Device Manager in the Computer Management window that appears. Click to unfold Ports (COM & LPT) and check the port to which the device is actually connecting. (eg: COM5 shown below.)
Right-click on the "update_firmware.bat" and select Edit, modify the port to the actual one verified in the previous step and click File>Save.
Double-click the update_firmware.bat to start the automatic firmware upgrade process and wait for it to complete in seconds.
Steps for macOS
Power on the Fire Safety Box (mainboard), and connect it to the computer with the original type-C USB cable.
Assume that the firmware pack folder is 'mhhz', right-click to open the terminal.
or
Enter the command "chmod 777 ./mac/esptool" to modify the executable file of the download tool
Enter the command "ls /dev/tty.usbserial*" to find the serial port number of the Fire Safety Box. eg: tty.usbserial-1410 is the serial port number.
Enter the command "./mac/esptool -p /dev/tty.usbserial-1410 -b 512000 write_flash 0x0 Extinguisher_Box_firmware_V40.201.005.3024.01B6_20221223.bin" in the newly opened terminal to download the firmware.
As shown in the picture below, the download is successful
Preview
Was this page helpful?
0 out of 1 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
If you want to cooperate with xTool on causes like education, public welfare, innovation, etc., or if you want to review our machines, please email partner@xtool.com