xTool M1 Ultra User Guide
Updated Aug 2,2024
Updated Aug 2,2024

Before starting the user guide of xTool M1 Ultra, you can go to xTool M1 Ultra Unboxing & First Use to see the video tutorial first.

Download PDF file (multi-language)

List of items

Unbox xTool M1 Ultra and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

xTool M1 Ultra

Laser module

Smoke exhaust module

USB cable

Power cable and adapter

Fine-cutting blade

Fine-cutting pen × 8

Pen holder

Triangular prism holder × 4

Triangular prism × 10

Cutting mat (LightGrip)

Cutting mat (FabricGrip)

Filter × 8

Key × 2

Grease

Material pack

Lens mount (spare part) × 2

Lens mount rotating piece

Screwdriver

User manual

Multi-function carriage

Cutting blade

Meet your xTool M1 Ultra

Product structure

① Basic carriage

② Multi-function holder

③ Wi-Fi antenna

④ Camera viewfinder point

⑤ Indicator

⑥ Point marking button

⑦ Start/Stop button

⑧ Rotary Attachment port

Thumb screw for the baseplate

 

⑩ Tube fitting for the air assist set

⑪ Tube fitting for the fire safety set

⑫ Power switch

⑬ Power port

⑭ Port for the key

⑮ Extension port × 4

⑯ USB port

⑰ Smoke outlet

Specifications

Product name

xTool M1 Ultra

Safety Classification

Class 1 Laser Safety

Size

620 mm × 498 mm × 178 mm

Weight

17 kg

Processing mode

Laser mode, blade mode, inkjet printing, pen drawing, multi-module processing

Processing area

Laser engraving and laser cutting - 300 mm × 300 mm

Blade cutting (fine-point blade, rotary blade, and foil transfer tip) - 300 mm × 300 mm

Blade cutting (cutting blade) - 295 mm × 295 mm

Inkjet printing - 294 mm × 298 mm

Maximum processing speed

400 mm/s (for bitmap)

Input power

25 V⎓ 8 A, 200 W

Laser module

455 nm blue-light laser

Laser power

10 W

20 W

Connection mode

Wi-Fi, USB, IP

Indicator description

Indicator status

Buzzer status

Device status

Solid white

/

Standby, not connected to XCS 
(at AP mode)

Solid light blue

/

Standby, not connected to XCS
(at STA mode)

Solid purple

Sounding once

Standby, connected to XCS

Breathing white

/

Sleeping, not connected to XCS

Breathing purple

/

Sleeping, connected to XCS

Blinking purple slowly

/

Firmware updating

Solid green

/

Processing area marking on XCS / 
Framing / Processing

Blinking blue slowly

Sounding once

Ready for framing / Ready to process

Solid blue

/

Task paused

Blinking yellow

Sounding once

The lid is open or not fully closed 
during operation.

Blinking yellow

Keep sounding

Flame detected (small flame) / 
Device shaken

Blinking red

Keep sounding

Flame detected (large flame)

Blinking yellow

Sounding three times

Exceptions occur

Blinking red

Sounding three times

Major exceptions occur

Get xTool M1 Ultra ready

1. Remove the limit screws

Note: xTool M1 Ultra has limit screws before both sides of the beam. The limit screws are used to prevent slipping gears during shipping. Before using xTool M1 Ultra, you need to remove the limit screws first.

(1) Open the lid of xTool M1 Ultra.

(2) Use your hands to rotate and remove the limit screws on the left side, right side, and multi-function holder.

2. Install the laser module

(1)  Align the slot of the laser module and the slot of the multi-function holder, slide the laser module, and install it on the multi-function holder.

(2) Push down the laser module until you feel it sits snugly on the holder.

(3) Toggle the locking bar to lock the module.

💡 Note: If you want to use other functions, you can switch the module or carriage accordingly.

3. Install the smoke exhaust module

(1) Put one piece of filter on the smoke exhaust module.

💡 Note: Do not use the smoke exhaust module without the filter. Or it may absorb smoke and dust and get damaged.

(2) On the back of xTool M1 Ultra, install the smoke exhaust module in the smoke outlet.

4. Insert the key

Insert the key to the corresponding port on the back of xTool M1 Ultra and unlock the processing and related functions. You can remove the key to lock the processing and related functions.

5. Connect to a power supply

Use the power cable and power adapter to connect xTool M1 Ultra with a power supply.

6. Download and install xTool Creative Space (XCS)

Go to xtool.com/software to download and install xTool Creative Space (XCS). 

7. Connect xTool M1 Ultra to a computer

Use the USB cable to connect xTool M1 Ultra to your computer. Turn on xTool M1 Ultra, and connect it to XCS. 

Use your xTool M1 Ultra

For more information on how to operate xTool M1 Ultra in different modes, go to:

 

Was this page helpful?
11 out of 12 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.