Article·4 min
Clean the Cyclone for AP2
xTool OfficialGenerally, you need to clean the cyclone every 3 to 6 months. Alternatively, you can check the condition of the cyclone through the windows at the top of the purifier, and clean the cyclone as needed.
1. Remove the cyclone
Note: Disconnect the power cable before removing the cyclone.

2. Clean the cyclone

Spray with degreaser.

Soak in water for approximately 10 minutes.

Wash with running water.
3. Install the cyclone back
When the cyclone trays are dry, install them back in place.


Note: Align the notches as illustrated.

Note the direction of the cover.



Preview
Was this lesson helpful?
Lesson 1 / 2
Next Lesson
Clean the Cyclone for AP2 Max
5 min
