Article·5 min

Materials Supported by xTool MetalFab

Material	1200w			800W		Engravable
Material	Dross-free Cut	Max. Cut	Weld	Dross-free Cut	Weld	Engravable
Carbon steel/low-alloy steel (A36/Q235/#45)	0.2-10mm	12mm	0.2-5mm	0.2-8mm	0.2-4mm	√
Alloy steel/tool steel/high-strength steel	0.2-4mm	6mm	0.2-5mm	0.2-4mm	0.2-4mm	√
Stainless steel (304, 316, 430)	0.2-5mm	10mm	0.2-5mm	0.2-4mm	0.2-4mm	√
Galvanized sheet	0.2-10mm	10mm	0.2-5mm	0.2-8mm	0.2-4mm	√
Aluminum alloys	0.2-4mm	7mm	0.2-4mm	0.2-2mm	0.2-2mm	×
Brass	0.2-3mm	4mm	0.2-4mm	0.2-2mm	0.2-2mm	×
Titanium alloys	0.2-5mm	5mm	0.2-5mm	0.2-2mm	0.2-4mm	√
Nickel alloys	√	4mm	0.2-3mm	0.2-2mm	0.2-2mm	√
Bronze	√	4mm	0.2-4mm	0.2-2mm	0.2-2mm	×
Magnesium alloys	√	3mm	0.2-3mm	0.2-2mm	0.2-2mm	×
Cobalt-based alloys	√	√	√	√	√	√
Painted/coated sheet	√	√	√	√	√	√
For detailed parameters and gas/nozzle requirements, please visit xTool-Recommended Materials and Parameters for xTool MetalFab CNC Cutter (Complete Version).

Preview

Was this lesson helpful?

Lesson 1 / 7

Expert 1-on-1 Machine Training

Account Center