For the main unit:

① Main unit

② Key

③ USB flash drive

④ Tube (external diameter: 10 mm)

⑤ Workpiece sensing cable

⑥ 304 stainless steel sheet (thickness: 2 mm)

For the welding head:

⑦ Components for welding head cradle

⑧ Cutting tip

⑨ Welding nozzle (for autogenous welding)
* The factory-installed nozzle on the welding head is typically used for wire-filled welding.

⑩ Cleaning nozzle (for handheld use)

⑪ Lens protector (spare part)

For the wire feeder:

⑫ Wire feeder

⑬ Wire feeding tube

⑭ Wire feeder cable

⑮ Stainless steel wire 1 mm

⑯ Drive roll 0.8 mm / 1.0 mm

⑰ Drive roll 1.2 mm / 1.6 mm

⑱ Wire feeding nozzle 1.2 / 1.6
* The wire feeding tube is pre-installed with a 0.8 / 1.0 wire feeding nozzle.

Tools:

⑲ Hex key 2 mm

⑳ Hex key 2.5 mm

㉑ Cotton swab

Personal protective equipment (PPE):

㉒ 1080 nm laser safety goggles

㉓ Heat-resistant gloves

Product documentation:

㉔ Safety Instructions

㉕ Quick Start Guide