xTool P3 Conveyor Rail User Guide
This passage describes how to install and use xTool P3 conveyor rail.
Download PDF file (multi-language)
You can click xTool P3 Conveyor Rail User Manual to download the multilingual user manual for the conveyor rail. The following languages are supported: English, German, Spanish, French, Italian, Dutch, Portuguese, Polish, Japanese, Korean, Traditional Chinese, and Chinese.
Safety first
- This product can only be used with xTool P3 automatic conveyor feeder. Before use, ensure that the automatic conveyor feeder has been installed in xTool P3.
- Before use, ensure that you have read and been familiar with the contents of the Safety Instructions of xTool P3 automatic conveyor feeder.
- Ensure that the placement direction of the conveyor rail is parallel to the feed direction during processing.
List of items
|
|
|
|
Conveyor rail | Support leg | Support leg base | Support beam |
|
|
| |
Screw M3*6 | Screw M4*6 | User manual |
Install the conveyor rail
(1) Assemble the support legs and support leg bases.
🔔 Pay attention to the orientation of the support leg base during the installation.
(2) Assemble other 7 support legs and support leg bases in the same way.
(3) Assemble conveyor rails and support legs.
(4) Assemble other 3 conveyor rails in the same way.
(5) Install support beams.
(6) Install the other set of support beams in the same way.
Place the conveyor rail
🔔
1. Ensure that the two sets of conveyor rails are fit closely.
2. To guarantee optimal processing quality, inspect the supporting platforms of the conveyor rails with the provided level before use. Ensure that platform surfaces are flat and all platforms are aligned at the same height. A centered bubble in the level indicates a flat surface.
3. After placing the material, if the two sets of conveyor rails are not at the same height, adjust the support legs of the conveyor rails to fix them with the original conveyor rails (as shown below). This will prevent the material from shifting during processing, which could affect the processing result.
Use the conveyor rail
The procedures for processing using the conveyor rails are the same as those of xTool P3 automatic conveyor feeder. For details, see Use Automatic Conveyor Feeder with xTool P3.
