Welcome to xTool Community Support
xTool P2 Series
Engraving on painted wood issue
krystlealice
Published on Nov 30,2024
5
76

Hi everyone! Has anyone engraved with the P2/P2S on painted wood? I used to engrave with a diode Atomstack X20) laser and was able to do this without any issues. But, on the P2S and I am not able to dial in my settings to engrave through the paint (2 coats of dried spray paint) WITHOUT burning/darkening the wood. I've done material testing for power ranging from 5%-70% and speed 50-600. I also played with the lines per cm and changed the mode to uni-directional, which does seem cleaner… but not clean enough. I will attach pics of my diode engraving (on the left) and my P2S engraving (on the right) as it's the cleanest I could get it. Thanks for any help!

Preview
XCS
Processing
Copyright © 2024 xTool All Rights Reserved.
Call Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales Hotline
+1(970)638-7030
Customer Service Hotline
+1(775)587-7760
Email Us
Service Time
Mon-Fri,9:00-18:30 PDT
Pre-sales and shipping related
vicky@info.xtool.com
vicky@xtool.com
After-sales and shipping related
support@info.xtool.com
support@xtool.com
Technical Support
support@info.xtool.com(US)
support@xtool.com(US)
support.eu@xtool.com(EU)
support.uk@xtool.com(UK)
Brand Cooperation
If you want to cooperate with
xTool on causes like education,
public welfare, innovation, etc.,
or if you want to review our
machines, please email
partner@xtool.com
US headquarter
XTL US INC. 16035 Arrow Hwy.
Irwindale. CA91706
Copyright © 2024 xTool All Rights Reserved.