How to View the G-code File on the TF Card
Updated Dec 11,2023
Updated Dec 11,2023

This article applies to:

D1 and D1 Pro.

 

Description

If you use XCS to operate the machine, most of the time, you don't need to deal with the G-code file. However, if you need to use some extra functions or troubleshoot, you may need to put a G-code file into the card or edit the content. This guide will help you find the location of the G-code file.

 

Instruction

1. Insert the TF card into the reader and plug it into a USB port on a computer.

 

2. On Windows, Go to This PC > Devices and drives > Find the USB drive

 

3. Open the USB drive and find the G-code files. The one named 'tmp.gcode' is the processing file

Note: the processing file is always named 'tmp.gcode'. Only one processing file can exist in the TF card at a time.

 

Questions?

Please contact us via support@xtool.com. Let us know what you need. 

 

Preview
Was this page helpful?
10 out of 17 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Copyright © 2024 xTool All Rights Reserved.
Call Us
Telephone
Pre-sales : +1(970)638-7030
After-sales : +1(775)587-7760
Email
Pre-sales : vicky@info.xtool.com
After-sales : support@info.xtool.com
Service Time
Mon-Fri : 7:00 am - 5:30 pm (PT)
Sat-Sun : 8:30 am - 5:30 pm (PT)
Copyright © 2024 xTool All Rights Reserved.