To give you a detailed guide for using the Smoke Purifier, the following contents are included in this article:

• Functions and Advantages
• Use xTool Smoke Purifier
• FAQs
• Suggestions on Filter Maintenance

Let’s find out!

Functions and Advantages

• 3-Layer Filtration & 99.97% Smoke Removal Rate
• Foam Seal Design: preventing smoke from leaking out, enhancing air purification effect
• User-friendly: air vents on both sides, better in ventilation and air dispersion. Moves around easily with handles and wheels on it
• Whisper Quiet Air Purifier: no more than 55dB* noise rate

*Compatible with: xTool M1, Laserbox Rotary, Laserbox Pro and most enclosed laser cutters on the market.

You can also use it with xTool D1, D1 Pro laser engraving machine.

Note that there’s no exhaust pipe included. It’s recommended to use it with xTool enclosure (includes an exhaust pipe) for D1 and D1 Pro.

Use xTool Smoke Purifier

Precautions

Before you connect the xTool Smoke Purifier to a power supply for the first time, please check whether

1. the surface of the purifier chassis is damaged.

2. the filters are properly placed in the chassis.

3. the lid is properly fitted on the chassis.

4. the power switch is OFF.

Instructions:

Step 1: Connect the purifier to a power supply, and check whether the power plug is properly connected.

Step 2: Turn on the purifier.

Step 3: Rotate the rotary knob to turn on the purifier and set the airflow as required. After processing, rotate the rotary knob to turn off the purifier and turn off the power switch.

Note: Set the airflow as required. Do not set the airflow too strong or weak. If you set the airflow too strong, more power is consumed and larger noise is made.

FAQs

1. The power indicator does not work when the machine is powered on and the power switch is turned on.

Possible causes: The fuse beside the power switch needs replacement.

Solutions: Replace the fuse with a spare one. You can watch the tutorial video for detailed steps.

https://support.xtool.com/hc/en-us/articles/5289675183255-How-to-Replace-the-Fuse-for-Smoke-Purifier

2. The purifier shuts down automatically after being powered on or restarted.

Possible causes: The starting current is too large due to poor air flow and high filter resistance inside the purifier. The purifier shuts down automatically when the protection mechanism is triggered.

Solutions: Turn off the purifier and open its lid to check whether the inlet is blocked. Ensure that the inlet is clear, set the air flow to its minimum, restart the purifier, and then set the air flow as required.

3. Why is my purifier running with weak air flow and poor suction?

Possible causes: The inlet gets blocked. / There are foreign matters in the pipes. / One or more filters fail to work after long-term use, which is indicated when the buzzer of the purifier sounds.

Solutions:

• Power off the purifier, open the lid and check whether the inlet is blocked; and then check whether the outlet is choked.
• Replace the filter(s). When the buzzer of the machine sounds, you need to clean or replace the filters for the purifier. You can visit xtool.com to buy the filters you need.

4. The motor of the smoke purifier fails to work though the machine is powered on and all indicators function well.

​Possible causes: Connection problems between the motor and the mainboard. / The motor may be broken.

Solutions: Power off the smoke purifier, open the rear panel, check the wiring, and connect the motor with the mainboard again. (If the motor still fails to work, the motor or the mainboard may be broken.)

Suggestions on Filter Maintenance

Please clean or replace the filters after long-term use to ensure a better purification effect.

1. Pre-filter (replace after use for 7 to 15 days): Replace the pre-filter when more than 70% of its surface is covered by dust that can’t be removed.
2. Middle filter (replace after use for 2 to 3 months): Clean the middle filter when the dust on it causes poor suction of the purifier. If you cannot clean the dust thoroughly, please replace the middle filter.
3. HEPA filter (replace after use for 3 to 6 months): Replace the HEPA filter when it fails to filter out smoke.