Hey xToolers,

In this tip, we'll cover everything you need to know about the Red Cross and Laser Spot, from the differences and software settings, to their applicable conditions.🙌 Look no further, let's get started!

Related content: What is laser offset? How to set the X/Y axis offset in XCS and Lightburn

🎯Red Cross VS Laser Spot: What's the Difference?

First, let's understand the difference between the Red Cross and the Laser Spot. As shown in the below photo, the Red Cross positioning light is generated from a separate output, while the Laser Spot positioning light shares the same outlet with the laser beam.

Here's How they looked like:

Red Cross (right), Laser Spot (left)

Emitter

The outlet next to the laser head in Red Cross mode; The laser head in Laser Spot mode

Other dimensions

🔁 Switch Between the Two Modes

Navigate to ⚙  > "Working parameters" and select the mode you want to use.

If you select Red Cross mode, a red cross laser will automatically emit every time the machine is turned on.

And if you choose Laser Spot mode, you'll need to enable it manually each time at Process > Enable.

Note: the maximum power of Laser Spot can be set to 10%.

Applicable Conditions

For D1 pro with 40W module, Laser Cross is not applicable when using Cylindrical Mode.