[Important Update] Firmware Security Update Notice for xTool Devices
Updated Sep 24,2026
Updated Sep 24,2026

To further improve the security of xTool devices and better meet safety regulation requirements, xTool will roll out new device firmware model by model.

This firmware update changes the way your device connects:

  • After the update, connecting to the device over Wi-Fi (non-USB) requires you to confirm on the device before the connection succeeds (only for the first Wi-Fi connection);
  • USB connections are not affected.

The new security firmware supports connections from xTool Studio V1.9 and later. Studio versions below V1.9 will not receive the push notification for this firmware. Update your software to the versions below first, and you will receive the update and connect to your device as usual:

  • xTool Studio (desktop): V1.9 or later
  • xTool Studio Mobile App V1.4 or later

Since everyone uses their machines differently, please refer to the guidelines below:

1. Users connecting from xTool Studio (desktop)

  • Product Impact: For a device that has received the update, the first Wi-Fi connection must be made from xTool Studio V1.9 or later. Studio versions below V1.9 cannot connect to the device over Wi-Fi.
  • Recommendation: Update xTool Studio to V1.9 or later before updating the firmware. This firmware is not pushed to Studio versions below V1.9, so keeping Studio up to date is all you need to receive the update and connect to your device.

2. Users working across both desktop and mobile

  • Product Impact: As soon as you update either xTool Studio or the xTool App to the new version, your device will receive this firmware update.
  • Recommendation: Update both xTool Studio and the xTool App to the latest versions (Studio V1.9 or later, App V1.4 or later) before updating the device firmware, so you are not left with one of them unable to connect.

3. Users sharing one device across multiple people or workstations

  • Product Impact: One device may be connected from several workstations by different members. Once one member updates their software and the device firmware, other members still on older software cannot connect to that device.
  • Recommendation: Have everyone update to the latest software version, so every member can connect as usual.

4. Users whose device is updated but whose software has been rolled back

  • Product Impact: If the device has already received this firmware update while your software has been rolled back to an older version, the device will not connect.
  • Recommendation: We will send a prompt to these users. Please follow it to update your software back to xTool Studio V1.9 or later.

We understand how complex device setups can be, and the xTool dedicated support team is here to provide the following assurances:

  • Upgrade Flexibility: Whether to update the firmware is entirely up to your working needs. If you find after the update that the new firmware does not fit your existing workflow, you can roll back the firmware through the existing process, and we will keep the firmware downgrade entry open.
  • One-on-One Technical Guidance: For any connection questions after the update, our technical experts will provide remote troubleshooting to make sure every device keeps running.

Please also note: this firmware update is released in batches by model. P1, P2, S1, D1, D1 Pro and M1 are not included in this round. The timing for each model may be adjusted, and the actual release is subject to the official xTool device firmware update announcements.

xTool is always user-centered, listening to feedback and continuously optimizing and updating to enhance the system and user experience. Thank you for your understanding and support.

Preview
Was this page helpful?
1 out of 1 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket
xTool Logo

Contact Us

🇺🇸+1 (833) 588-4887
Service Live Chat

Copyright © 2026 xTool All Rights Reserved.