Account Center

V0.6.6 Release Notes

• Added an offline processing toggle. When enabled, users can double‑click the processing button to directly start the last‑run job;
• Added delayed‑off function for the fill‑in light, supporting a maximum delayed‑off time of 10 hours for demonstration;
• Control Panel: Added a light switch to turn the internal device light on or off to meet lighting requirements for user scenarios such as shooting and
• maintenance; (Only available for firmware ≥013)
• Pre‑processing judgment optimization: Ink path alerts can now be ignored, and ink‑level checking before printing has been added;
• Remaining‑volume display optimization: The displayed remaining ink volume follows values reported by the firmware;
• Initialization Wizard: Added installation detection for the print‑head top cover;
• Background Scan: Added CIS dirt warnings for Flatbed mode and DTF mode (other modes will be officially supported in Studio V1.10);
• Scan Image Retention: Scanned images remain on the canvas unless you perform a rescan (overwriting the current mode), connect to another device, or exit the software;
• Device Health: Added description for the "Low‑Power" feature within Device Health;
• Rotary Accessory Calibration Wizard: Revised text on the dual‑UV calibration completion page.

V0.5.24 Release Notes

• Improved the success rate of ink filling during initialization, reducing the need for repeated cleaning.
• Enhanced the Device Health experience and added ink volume information.
• Added default ink prices for more countries and regions.