1. Install the mini baseplate with the mini adhesive mat attached.

2. Place the rock coaster onto the mini adhesive mat.

3. Press the device button to move the printing platform into the printer.

1. Select mode: UV flatbed mode

2. Select the material: Square Rock Coaster

3. Click Scan to capture the workspace background.

4. Drag the pattern into the canvas, or import it.

5. Drag the pattern to adjust its position and size to make it match the rock coaster.

6. In the lower-right corner, set parameters as follows:

• Select Flat.
• For Ink mode, select White+Color.
• 2 white ink layers and 1 color ink layer

🌟 White ink is used to cover the original color of the substrate and provide a proper base for color printing.
For white or light-colored materials, one layer of white ink is usually enough. For dark-colored materials, 2–3 layers are recommended to ensure full coverage and accurate color reproduction.
The rock coaster is dark. Therefore, we recommend using at least two layers of white ink.

1. Click Process in the lower-right corner.

2. A printing confirmation page appears, showing the estimated processing time and ink cost. After confirming the information, click Print in the lower-right corner. Wait for the printing to finish.