Note: The 55W CO₂ laser module is preinstalled in xTool X1. The 20W diode galvo module and galvo sources (30W fiber, 60W MOPA, 5W UV) need to be purchased separately.
Processing areas of five laser sources
Maximum material dimensions: 782 × 360 mm
Laser source | Processing module | Processing area (L × W) |
|---|---|---|
CO₂ laser | 55W CO₂ laser module | 55W CO₂ laser module only: up to 615 × 320 mm With the galvo module installed: 615 × 320 mm With the conveyor feeder installed: up to 610 × 1220 mm |
Diode laser | 20W diode galvo module | 610 × 305 mm |
Fiber laser | 30W fiber galvo source → 20W diode galvo module | |
MOPA laser | 60W MOPA galvo source → 20W diode galvo module | |
UV laser | 5W UV galvo source → 20W diode galvo module |
Processing areas of different processing modes
Processing mode | Laser source supported | Processing area (L × W) |
Color engraving | MOPA laser | 610 × 305 mm |
Inner engraving / Batch inner engraving | UV laser | 600 × 300 mm (Z ≤ 50 mm, Z stands for the material height) 60 × 300 mm (50＜Z ≤ 100 mm, Z stands for the material height) |
Embossing | MOPA laser | 610 × 305 mm (Without exhaust assembly for embossing) 395 × 205 mm (With exhaust assembly for embossing) |
Batch processing | CO₂ laser | 722 × 357 mm |
CO₂ laser + 20W diode laser | 722 × 348 mm | |
CO₂ laser + 20W diode laser + galvo sources (With exhaust assembly for embossing) | 495 × 178 mm |
