Introduction
Light-colored garments pretreatment solution = Color ink pretreatment solution
Dark-colored garments pretreatment solution = White ink pretreatment solution
Pretreatment solutions help improve ink adhesion to fabric and ensure vibrant, professional prints when printing using xTool O1 Omni Printer.
Two types of ink pretreatment solutions are currently provided: dark-colored garments pretreatment solution and light-colored garments pretreatment solution. This document describes information, precautions, and usage of the light-colored garments pretreatment solution. For details about the dark-colored garments pretreatment solution, see Dark-Colored Garments Pretreatment Solution for O1 Omni Printer.
Product name: Light-colored garments pretreatment solution Net content: 50 mL/500 mL Shelf life: 12 months (1 month after dilution) Application: Pretreatment for light-colored garments before printing Dilution: Dilute with water at a ratio of 1:19 [Buy now] | |
Safety precautions
■ Keep out of reach of children. ■ Keep away from fire and flames. ■ Exercise caution when dealing with ink pretreatment solution and never allow it to enter your eyes or get on skin.
■ The light-colored garments pretreatment solution is a cationic polymer. Do not allow it to come into direct contact with the printhead, anionic inks, or other anionic substances. ■ The ink pretreatment solution may cause skin irritation, allergic skin reactions, or serious eye irritation. ■ Wash your hands and other body parts exposed thoroughly after handling ink pretreatment solution. ■ If ink pretreatment solution is swallowed, seek medical advice immediately.
Usage
Note:
1. Use light-colored garments pretreatment solution only to pretreat light-colored garments.
2. Before applying light-colored garments pretreatment solution, you need to heat press it using a heat press machine. For details, see Prepare the garment.
1. Pour an appropriate amount of the pretreatment solution into the spray bottle. Then dilute the pretreatment solution with water at an approximate ratio of 1:19.
2. Shake the diluted pretreatment solution well.
3. Spray the pretreatment solution evenly onto the target print area on the garment.
Recommended amount: 15-20 mL
4. Heat press the garment again and finish printing as instructed in User guide for xTool O1 Omni Printer Garment Tray.
