Read and get familiar with all safety precautions and procedures before using the product. Strictly follow all safety precautions.

1. General safety guidelines

• This product can be used with xTool O1 Omni Printer or be used independently.
• Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
• Do not use this product in a damp environment.
• Use this product in a well-ventilated environment.
• While using this product, ensure that sufficient workspace is available.
• Children are prohibited from using this product.
• Place this product in a flat, non-flammable surface for use and ensure that the workspace is clean.
• During use, keep your hands and body parts away from the device to avoid burns.
• Do not place flammable and explosive materials (such as paper, cleaning agents, and cloth) near this product.
• Cut off the power before maintaining the product.
• Do not place sharp objects into the product.
• Do not disassemble the product or change its structure in any way without authorization. Do not modify or decompile its operating system.
• This product is not user-serviceable. It must be returned to the factory or repaired by authorized professionals.

2. Material requirements

• The thickness of materials to be laminated must be uniform, as uneven thickness may affect the lamination results.
• Do not laminate heat sensitive materials such as thermal fax paper.
• Do not use cold seal laminating pouches in a hot seal laminator. Otherwise, the device, pouch, and document will be damaged.
• Before lanimating, remove staples or paper clips from the materials to avoid damaging the device.

3. Blade safety

• The cutting blade is sharp. Exercise caution during disassembly or installation to avoid cuts.
• Place the used blades in a container that can prevent sharps from hurting people, such as a metal box, seal the container, and dispose of it.