Download PDF file (multi-language)
Introduction
xTool X1 honeycomb panel is a working panel designed for xTool X1. During laser cutting, it can improve the cutting results by reducing the burned area on the back of the material and protect the baseplate. In addition, the provided material pins allow you to fix materials on the honeycomb panel.
List of items
Honeycomb panel |
|
|---|---|
Material pin |
|
User Manual |
|
Use the honeycomb panel
⚠️ Caution
■ Handle the honeycomb panel with care. Dropping or crashing the honeycomb panel may deform it and affect its function as a working panel.
■ The edges of the honeycomb panel are sharp. Handle with care to avoid injury.
Using one honeycomb panel
Place the honeycomb panel into the baseplate of xTool X1 with the side labeled "XTOOL" facing forward.
Required: Honeycomb panel
⚠️ Caution
■ Ensure that the honeycomb panel is placed flat and aligned parallel to the front and rear edges of the baseplate of xTool X1.
■ To adjust the processing position, slide the honeycomb panel left or right.
Using two honeycomb panels
💡 Tip
To expand the processing area, you can purchase an additional honeycomb panel and install both panels in xTool X1.
(1) Place one honeycomb panel into the baseplate of xTool X1 and move it to the far left.
Required: Honeycomb panel 1
(2) Place the second honeycomb panel into the baseplate with the side labeled "XTOOL" facing forward.
Required: Honeycomb panel 2 (sold separately)
⚠️ Caution
Ensure that both honeycomb panels are placed flat and level with each other.
Use the material pins
💡 Tip
■ When processing thin or lightweight materials, use the material pins to prevent material shifting or deformation.
■ Supported material thickness (H) of the material pins: H ≤ 10 mm.
(1) Place the material flat on the honeycomb panel.
Required: Material (not included, H ≤ 10 mm)
(2) Insert the material pins to secure the four corners of the material.
Required: Material pin*4
⚠️ Caution
Ensure that the two legs of the material pin are correctly oriented and inserted.
💡 Tip
If the material has a large surface area, use six material pins to secure it.
