Preparations
1. Connect the conveyor to xTool F2 Ultra UV
(1) Install fastening piece D on the conveyor
(2) Install fastening piece C on xTool F2 Ultra UV
(3) Secure the conveyor on xTool F2 Ultra UV
(4) Connect the conveyor to xTool F2 Ultra UV using the connection cable
2. Connect the touchscreen controller to xTool F2 Ultra UV
3. Connect xTool F2 Ultra UV in xTool Studio
(1) Use the USB cable to connect xTool F2 Ultra to your computer.
(2) Open xTool Studio on your computer. On the top-right corner of xTool Studio, click + New Project.
(3) On the top-right corner of the project editing page, click to connect/switch device.
(4) On the pop-up window, click + Add Device.
(5) On the pop-up window, click the name of your device to connect to it.
(6) If you need to switch the device, click Switch on the pop-up window.
4. Ensure that the field lens in xTool F2 Ultra UV is the surface engraving lens
Check whether the field lens in xTool F2 Ultra UV is the surface engraving lens. If the inner engraving lens is installed, remove it and replace it with the surface engraving lens. Otherwise, xTool F2 Ultra UV cannot process materials when used with the conveyor.
Process materials in batches with the same design
1. Select the processing mode
In the top-right corner, click the name of the current processing mode, and then select Same design - batch processing as the processing mode.
2. Place the material and perform laser focusing
(1) Place a material in the processing area, allowing the blue light spot to fall on the surface of the material.
Note: Do not use thin materials permeable to light (such as paper and cloth) on the conveyor. Laser beams falling on the belt will damage it.
(2) Hold down on the Up/Down button for laser module on the touchscreen controller to lift or lower the laser module. When the red and blue light spots overlap, the focus is successfully set.
Note: The blue light spot does not move. If the laser module moves up, the red light spot moves towards the left. If the laser module moves down, the red light spot moves towards the right. xTool F2 Ultra UV supports auto-focus and manual-focus. Here we use manual-focus. For more information on how to use auto-focus, see Perform Laser Focusing.
3. Shoot background and design a processing object
(1) Click Refresh background.
xTool Studio takes a photo of xTool F2 Ultra UV’s processing area and inserts the photo as the canvas background. You can position processing objects based on the background.
Note:
-To ensure positioning accuracy, set the laser focus before shooting background.
- Ensure that the background photo can fully and clearly display the materials. You can adjust the shooting environment by adjusting the device's fill light or pulling down the protective enclosure.
- If the materials in the photo have obvious shadows or are not clear, adjust the material position and click the Refresh background icon in the top-right corner of xTool Studio to take a new photo.
(2) Using the tools to the left of the canvas, create an object on a material.
Note: For now, the batch processing modes support processing only one object at a time.
(3) Select the object to further edit it using the tools on the top of the canvas.
4. Set the processing parameters and processing path
(1) Select objects on the canvas. On the right side of xTool Studio, set parameters for the selected objects.
(2) Click Next in the Design a processing object dialog box.
Note: The conveyor does not support laser cutting.
5. Frame out the sample material
The first material placed in the processing area is used as the sample material. During batch processing, xTool Studio will fill the other materials based on the sample design. Framing out the sample material helps improve the accuracy of batch filling.
(1) Drag the bounding box and make it cover the sample material. Then, click Process.
Note: If Same-direction Processing is enabled, materials of the same shape will be engraved with the same object in the same direction.
(2) Wait until xTool Studio helps you to fill the object on every material automatically.
6. Start processing
Click Preview Processing Path and then click the button in the bottom left corner, and xTool Studio will show you the processing path.
(2) Wear a pair of goggles that can shield laser beams of 355 ± 5 nm wavelengths.
Note: If you purchase goggles from our website, ensure that you select this specific pair.
Note:
When xTool F2 Ultra UV is used with a conveyor, its protective enclosure cannot be fully closed. For your safety, it is recommended that you wear goggles during processing.
Safety goggles are not included with xTool F2 Ultra UV or the conveyor. Please purchase them separately.
(3) In the bottom right corner of xTool Studio, click Start.
(4) When the software shows “Ready”, press the XTOOL Start/Stop button on the touchscreen controller to start processing.
(5) During processing, keep adding new materials to the conveyor. Place them to the right of the processing area.
Note: Pull down the protective enclosure until it remains no more than 5 mm above the material before processing.
Note:
- When placing materials, keep your hand away from the processing area to avoid injuries.
- Do not place a material close to the edges. Otherwise, the material may fail to be processed.
- Ensure that the materials do not touch or overlap with each other.
7. Stop processing
- Auto-stop: If no material is detected 5 consecutive times, the batch processing will automatically end.
- Manual-stop: Click Cancel in xTool Studio or double press the XTOOL Start/Stop button on the touchscreen controller.
Services & Help
Learn & Community
Copyright © 2025 xTool All Rights Reserved.