Read the following warnings and suggestions carefully:
- Do not use the air purifier in places where the temperature is high (over 60℃), fire or explosion is likely to happen, or there is liquid or oil.
- Ensure that earthing is done before operation.
- Only professionals can open the rear panel to examine or repair the purifier as the voltage inside it reaches 320V.
- Do not move any filter or cyclone during operation.
- Do not touch the rotating impeller with your hands or other objects.
- Do not disassemble the product or change its structure in any way without authorization.
- To clean or maintain this product, disconnect the power supply first.
- Ensure that the purifier operates in the specified voltage range (subject to the power information labelled on the machine). Turn off the purifier and disconnect it from the power supply when the voltage is unstable.
- The operating humidity ranges from 40% to 80%. Do not use the machine out of this humidity range. Otherwise, the filters may fail to work soon and the interior circuit may be damaged.
- The filters come with protective packaging. Remove the packaging before use. Filters are disposable and do not wash and then reuse them. Purchase filters from Makeblock for replacement regularly.
- Place filters in the purifier before operation. Without filters, smoke or dust particles may enter the van and control system and thus damage them. When this happens, you have to fix it at your own expense.
- Stop using the purifier when filters are heavily blocked. Otherwise, the purifier may become less durable and even be damaged. Regularly clean and maintain it, and routinely change filters to ensure the proper operation of the purifier.
- Ensure that all the filters are set properly before operation. When the filters are blocked, poor at filtering or fail to work, purchase filters from Makeblock to replace them.