This tutorial is about using the Grid Array function in xTool Studio. This efficient feature enables you to generate an automatic grid array for your design patterns (available for both bitmap and vector files). This way, you can generate multiple identical patterns, optimize the utilization rate of materials and quickly preview the overall effect.

To begin, make sure your device is connected before running the grid array. This is important to validate the results for your specific device.

Step 1

Create an element or import a design file (Both vector and bitmap files are supported).

Step 2

Set the processing type and all the related parameters. These settings will become the default value of the grid array.

Step 3

Select the element, navigate to the left bar, and click “Applications”, select "Grid Array".

Next, you will see a pop-up setting panel as shown below. While the current table carries default values, feel free to change columns and spacing according to your project's needs.

• The X columns and X spacing represent the number of columns in the array, and the spacing between columns.
• The Y rows and Y spacing represent the number of rows and spacing between rows.

Step 4

• Click 'Done' to generate a grid array on the canvas. This array is based on your parameter settings with an equal difference value for each element. The grid array is grouped automatically, but you can adjust each element individually by ungrouping it.

Reminders:

When setting parameters, referring to the recommended parameters for your device and specific material is important. If the parameters are extremely high or low, you may cause fire when processing. Also, please watch the device when processing.