Account Center

Test Processing Parameters for Your Fast-engrave Screens

1. It is recommended to use the suggested parameters for the material to be processed in the software for machining；
2. After carving is completed, you can use light contrast to check whether the Polyester Screen is translucent, and whether the mesh has deformed or broken due to excessive power or density；
3. If the effect differs from the normal situation, you can create a small-scale matrix centered on the recommended parameters for engraving, select the most suitable effect from the matrix, and then engrave using the selected parameters；
4. When performing laser engraving on the screen, the laser processing path is set to unidirectional scanning mode；