Operating System Requirements
Updated Sep 4,2025
Updated Sep 4,2025
xTool Studio can be installed on Windows or Mac. The following are the minimum and recommended system requirements.
Minimum and recommended requirements for your device
Use xTool Studio on Windows or macOS
Item | Minimum configuration | Recommended configuration |
Processor | Intel Core i5-6200U | Intel Core i5-11600 or higher |
Operating system | Windows 10 (64-bit) | |
macOS 11 (Big Sur) or later | ||
RAM | 8 GB | 16 GB or larger |
Display resolution | 1280 × 720 (pixels) | 1920 × 1080 (pixels) or higher |
Hard drive | 8 GB | 12 GB or larger |
Notes:
- With the minimum configurations, all the functions of xTool Studio can be used properly. When you import or edit a complex image, however, xTool Studio may fail to run smoothly.
- With configurations lower than the minimum requirements, the functions of xTool Studio may run properly, but lagging or system crash is more likely to occur, causing poor experience. Technical support may not help.
- With the recommended configurations, xTool Studio can run more smoothly when you import and edit a complex image, the software delay may be shorter, and the performance is better. But for very complex images, lagging may still occur.
- When you run xTool Studio on a laptop, you are advised to connect it to a power supply and turn off the energy-saving mode.
- xTool Studio does not support Linux operating systems or ChromeOS.
- xTool Studio does not support computers powered by Snapdragon X series.
Preview
Was this page helpful?
10 out of 12 found this helpful
Help Ticket
Use this help ticket to submit your issue. We will respond within 1 business day
Submit a Ticket 
