Account Center

When working with a machine connected to xTool Studio, you need to set the material parameters first. Different parameters will produce different finished results. We have prepared recommended settings for different materials based on the specific machine, processing mode, and processing type, so you can easily find the most suitable parameters for each material.

Select Material

1. Click the material entry to open the material selection popup：
2. 1. Commonded Materials: Displays the materials you have used, materials you have added, and materials from the device’s consumable package.
   2. Recommended Materials: Officially recommended materials that can be filtered and viewed by different material types.

2. After selecting a material, you can view the recommended processing modes for that material, as well as important usage notes to keep in mind when working with it. You can also place an order to purchase the material directly. We will continuously verify and update the usage notes to ensure they remain accurate and complete.

3. If the current material does not have recommended parameter settings for the current device, the following message and style will be displayed. You can also use the filter to quickly narrow the list to only show materials with recommended parameter settings.

4. Apply Material – After selecting the material you want to use, the workflow will vary:

• If the material shows large variations in processing results, you’ll see a grid test matrix with sample effects. Simply click on the effect you like to apply its settings instantly.
• If the material shows only small variations in results, we’ll provide a single set of recommended parameters and an accompanying sample image.

Recommended version: xTool Studio 1.0 or above.