Account Center

For the main unit:

① Main unit

② Key

③ USB flash drive

④ Tube (external diameter: 10 mm)

⑤ Power cable
* The power cable varies according to the region in which the product is delivered.

⑥ Workpiece sensing cable

⑦ 304 stainless steel sheet (thickness: 2 mm)

For the welding head:

⑧ Components for welding head cradle

⑨ Cutting tip

⑩ Welding nozzle (for autogenous welding)
* The factory-installed nozzle on the welding head is typically used for wire-filled welding.

⑪ Cleaning nozzle

⑫ Lens protector (spare part)

For wire feeding:

⑬ Wire feeding tube

⑭ Stainless steel wire 1 mm

⑮ Drive roll 0.8 mm / 1.0 mm

⑯ Drive roll 1.2 mm / 1.6 mm

⑰ Wire feeding nozzle 1.2 / 1.6

* The wire feeding tube is pre-installed with 
a 0.8 / 1.0 wire feeding nozzle.

Tools:

⑱ Hex key 2 mm

⑲ Hex key 2.5 mm

⑳ Round tip cotton swab

㉑ Pointed tip cotton swab

Personal protective equipment (PPE):

㉒ Heat-resistant gloves

㉓ 1080 nm laser safety goggles

* The provided safety goggles protect not only against laser radiation in the vicinity of the 1080 nm wavelength range (OD6+) but also against secondary radiation such as ultraviolet and blue light (OD5+).

Product documentation:

㉔ Safety Instructions

㉕ Quick Start Guide