Introduction

This guide provides instructions on how to connect your xTool OS1 Automatic Shaker Oven to either the recommended xTool SafetyPro™ AP2 or a third-party purification system.

Connect with xTool SafetyPro™ AP2

Important Note: No external Bluetooth dongle is required for the connection between the oven and the AP2 purifier. The oven features a built-in Bluetooth module designed for connectivity with xTool SafetyPro AP2.

For a complete, step-by-step video guide on how to connect and configure your oven with xTool SafetyPro™ AP2, please refer to the following tutorial:

Use with a third-party purifier or no purifier

For optimal curing results and your personal safety, xTool strongly recommends connecting your xTool OS1 Shaker Oven to a suitable air purification device.

Third-party purifier requirements

If you choose to use a third-party purifier, you must verify that it meets the following critical requirements to ensure it functions effectively and safely with the oven:

• Airflow Capacity: Must be 120 m³/h. An incorrect airflow will not capture fumes effectively.
• Filter Material: Must be compatible with glycerol and VOCs to ensure long-term durability and effective purification.

Operate without a purifier

⚠️ Important Safety Notice: Operating the xTool OS1 without a purifier is not recommended as it may lead to poor curing results, indoor air pollution, and potential health risks.

For a detailed explanation of these risks and safety precautions you must take if operating temporarily without a purifier, refer to xTool’s official safety statement: xTool OS1 Important Notice: Achieve Optimal Curing Results & Safety with Proper Air Purification