Important Safety and Compliance Notice

• The wiring involves electrical connections and must only be performed by a qualified electrician in strict accordance with all applicable local and national electrical codes and regulations.
• This document is intended solely for reference by qualified electricians to support professional installation. It is not intended as a guide for end-users, untrained personnel, or anyone without proper electrical qualification.
• Improper installation by unqualified individuals may lead to electric shock, fire hazards, equipment damage, and serious injury. xTool hereby disclaims all responsibility for damages or injuries resulting from improper installation.
• By using this document, you acknowledge that you are a qualified electrician and understand your obligation to follow relevant electrical codes and safety standards during installation.

For US Version (US/CA Region)

• Use an adapter. It is advised to use 10 AWG version.
• Follow the instructions to replace the plug.

1. Cut the old plug

• The reserved length is at least 5 cm.
• Tools needed: a utility knife or specialized wire stripping scissors.
• Organize the exposed wires.

• Green - Ground wire
• Black - Live wire
• White - Neutral wire (marked as W on the socket)

For Non-US Version (EU/UK Region)

• Yellow-green - Ground wire
• Brown - Live wire
• Blue - Neutral wire