About this video tutorial
This video tutorial aims to provide step-by-step instructions for the daily cleaning and maintenance of your xTool OS1 Shaker Oven machine. Proper routine cleaning is essential for ensuring optimal performance and longevity of your equipment. The procedures outlined in this guide detail the recommended cleaning frequencies for key components, the necessary tools, and best practices to follow during maintenance.
Recommended maintenance schedule
Component | Cleaning Frequency | Cleaning Instructions/Notes | Component Location |
Inspection Window | As needed | Clean if adhesive powder is visible and affects observation. |
|
Powder-Shaking Motion Sensor | Weekly | Clean immediately if the error "Please clean up any accumulated film or powder in the powder" appears. |
|
Film Detection Sensor | Daily | Recommend cleaning it before operation. |
|
Film Fork-Lifter | As needed | Clean if ink smudges or excessive adhesive powder accumulates on the fork. |
|
Powder Bin Area | As needed | Clean if there is a significant accumulation of adhesive powder on the area. |
|
Waste-Powder Bin | Weekly (or as needed) | Clean if there is excessive buildup of powder; frequency may vary based on processing duration. |
|
Delivery Slot | Weekly | Clean if noticeable adhesive powder accumulates beneath the slot. Also, check the waste bin for excess powder. |
|
Film Output Detection Sensor | Monthly or as needed | Clean immediately if "delivery slot full" is indicated even after film cleaning, or if a "film output error" message occurs. |
|
Glycerin Container | Monthly or as needed | Clean immediately if the container is full or any glycerin overflows. |
|
⚠️ Important notes
When performing the cleaning procedures, please:
- Personal Protection: Always wear nitrile rubber gloves during cleaning to prevent dirtying your hands.
- Cleaning Tools: Some components require cleaning with a dedicated brush. Please ensure that you use the brush included in your package appropriately to avoid damage.
Tools required
To ensure a smooth cleaning process, please prepare the following items:
- Cleaning brush
- Paint brush (self-supplied)
- Lint-free cloth
- Nitrile rubber gloves
- Phillips screwdrivers (self-supplied)
- Trash bin (self-supplied)
- Glycerin container (self-supplied)
Cleaning procedure
Documentation feedback
Help improve this content by providing feedback. If this content did not meet your requirements, select "No" in the "Was this page helpful?" section below. Include specific details about what was unclear or missing in the pop-up suggestion box. Feedback submissions are reviewed by xTool technical writers to enhance future documentation.
Services & Help
Learn & Community
Contact Us
Copyright © 2025 xTool All Rights Reserved.