xTool Apparel Printer Versatile Bundle Unboxing and First Use
Download PDF files (multi-language)
List of items
Unbox xTool Apparel Printer versatile bundle and check the items inside the pack. If you find items missing or broken, please get in touch with us for after-sales support.
xTool Apparel Printer
 1. xTool Apparel Printer |  2. xTool Apparel Printer film holder and roll 25 m |
 3 & 4. Bracket |  5. Output tray |
 6. Ink 500 ml |  7. Moisturizing liquid 500 ml |
 8. Power cable |  9. USB cable |
 10. Syringe |  11. Screw M4*16 |
 12. Cleaner 100 ml |  13. Dropper |
 14. Cleaning swab |  15. Tube |
 16. Cleaning cloth |  17. Print head protection box |
 18. Lubricating oil |  19. Plastic bag |
 20. Quick start guide |  21. Maintenance instructions |
 22. Safety instructions |
|
xTool OS1 Automatic Shaker Oven Machine
 23. xTool OS1 Automatic Shaker Oven Machine |  24. Smoke exhaust pipe |
 25. Power cable |  26. Data cable |
 27. xTool Selected Apparel Printer powder |  28. Screw M5*50 (A spare screw is provided.) |
 29. Double-end screwdriver |  30. Spanner |
 31. Cleaning brush |  32. Safety instructions
|
| Note: The power cable may vary according to kits. The illustration is for reference only. | |
Meet your xTool Apparel Printer Versatile Bundle
Meet your xTool Apparel Printer
Meet your xTool OS1 Automatic Shaker Oven Machine
Install xTool OS1 Automatic Shaker Oven Machine and xTool Apparel Printer
1. Secure xTool OS1
When you place xTool OS1, leave at least 1 m (40 inches) of space at the back and 90 cm (35 inches) of space on both sides for daily use and maintenance.
(1) After the position of xTool OS1 is determined, unscrew the bottom nuts on the four foot cups with a spanner.
(2) Unscrew four foot cups with your hands until the foot cups touch the floor.
(3) Keep unscrewing the foot cups until the wheels are off the floor.
(4) Screw the upper nuts on the four foot cups with a spanner.
2. Place xTool Apparel Printer
💡 Pay attention: • To ensure your safety and avoid device damage, the printer should be moved by at least two adults. (The printer sold separately.) |
Align the printer's delivery slot with the xTool OS1's connection slot, and connect them together.
3. Prepare the print head
(1) Open the lid and move the print head to the middle.
(2) Remove the cover of the print head, and move the print head to the right.
4. Secure xTool Apparel Printer and xTool OS1
Prepare two screws and a screwdriver. (Pay attention to the size of the screwdriver's end that you need)
Install two screws in the holes, and tighten them.
5. Install the bracket and xTool Apparel Printer film roll
(1) Find the pinch roller switch in the printer. Toggle up the pinch roller switch to open the pinch roller.
(2) Go through the four holes in the brackets with a screwdriver. Use four screws to secure the brackets on the printer.
(3) Make sure the brackets are secured firmly. Lift the locking bar on the left bracket.
(4) Install the roll on the bracket with the roll's two sides aligned with the notch of the bracket.
💡 Note: When placing the holder, mind your hands and make sure that the fasteners on both sides of the holder are secured properly.  |
(5) Press down the locking bar.
6. Feed film into the printer
| 💡 Note: Remove the sticker off the roll before feeding the film. |
(1) Feed the film into the printer through the feeding slot.
(2) Pull the film from under the pinch rollers.
Ensure that the film covers the starting position of the processing area and aligns with the white marking line on the right.
(3) Move the guide plates on both sides to cover the film.
| 💡 Move the film until its side edges are in the center of the guide plate holes, as illustrated in the following figure. Note that the distance between the guide plate and the film should not be too close or too far. Otherwise, it may cause problems such as film bulging. |
(4) Press down the pinch roller switch and close the lid.
7. Fill in moisturizing liquid and ink
(1) Remove the ink tank cover, and open the cover of the moisturizing liquid tank.
(2) Open the cap of the moisturizing liquid bottle, remove the sealing film, and screw the cap back on.
Rotate the cap nozzle and remove it.
(3) Fill the moisturizing liquid into the moisturizing liquid tank. Close the silicone cover.
💡 Note:
|
(4) Open the ink tank cover.
(5) Fill the ink into the ink tank.
| 💡 Note: When filling ink, take care to prevent spills on your clothes. |
💡 When you use white ink, remember to shake it well before adding it.  |
| 💡 Note: After adding ink, be careful when you open the ink tanks again, as the ink may splash into the inside of the device. |
(6) Repeat the steps above to fill the other four ink colors. And close the ink tank covers.
(7) Put the cover back on the device.
8. Add the powder
(1) Press the door to open the powder bin. Hold the handle to rotate the powder bin 180° clockwise.
(2) Hold the handle and pull out the powder bin.
(3) Pour the powder into the powder bin evenly, one pack at a time. The weight of the powder should be ≤ 1 kg.
| 💡 Make sure there are no foreign objects in the powder bin. If there are any, remove and dispose of them promptly. |
(4) Slide the powder bin back to the device. Rotate the powder bin 180° anticlockwise to pour the powder into xTool OS1. Close the door.
9. Install the output tray
(1) Turn over the output tray and open the two stands under it.
(2) Install the output tray on the device.
10. Connect xTool OS1 to xTool SafetyPro™ AP2
💡 xTool SafetyPro™ AP2 sold separately.  |
(1) Install the adapter on the pipe.
(2) Stretch the smoke exhaust pipe as long as it will go. Then, install the pipe on xTool SafetyPro™ AP2.
(3) Install the other end of the pipe to the device. Then, connect the power cable to xTool SafetyPro™ AP2.
Use xTool OS1 Automatic Shaker Oven Machine
1. Connect xTool OS1 to xTool Apparel Printer
Connect one end of the data cable to the port on the printer, and connect the other end to the data port on the shaker oven.
2. Connect to a power supply
| 💡 To ensure the normal functioning and maintenance of the printer, do not disconnect its power supply. |
Turn on the power switch of xTool OS1.
3. Complete the setup
Tap the screen on the printer and complete the device's initial setup.
4. Get the software
Go to s.xtool.com/software to download and install the xTool software.
5. Connect xTool Apparel Printer to a computer
Plug the USB cable into the USB port in the printer and the computer.
For details about how to use the software to operate xTool Apparel Printer and xTool OS1, go to Operate xTool OS1 Automatic Shaker Oven Machine in xTool Software.
FAQ
1. I want to open the maintenance door. What can I do?
(1) Turn off the power switch of xTool OS1.
(2) Detach the screwdriver handle and bit. Use the narrow end of the bit.
Unscrew the screw of the maintenance door.
(3) Press the round pull and open the maintenance door.
(4) Close the maintenance door after use.
(5) Tighten the screw.
(6) Turn on the power switch.
2. How does xTool SafetyPro™ AP2 work with xTool OS1?
Go to Use xTool SafetyPro™ AP2 on xTool Software to learn more.
Services & Help
Learn & Community
Contact Us
Copyright © 2025 xTool All Rights Reserved.