Download PDF files (multi-language)

Unboxing xTool Air Compressor

List of items

Unbox xTool Air Compressor and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

Meet Air Compressor

Product structure

Product specifications

Connections

Since the air compressor is designed to be used with the air dryer and the welder, this manual includes instructions for operating the air dryer. Please find the air dryer components from its package.

1. Connect the devices

2. Connect drain tube

■ Connect the drain tube to the drain outlet and guide the tube to a wastewater disposal area.

3. Connect to power supply

Use the devices

1. Power on

Power on the air dryer first and then the air compressor.

CAUTION: The air compressor’s upper part heats up during operation. Do not touch it during operation or shortly after it shuts down.

2. Check the safety valve of the air compressor

3. Set pressure

Pressure range: 0.3–1.0 MPa 

Recommended pressure: 1.0 MPa 

Up button: + 0.05 MPa per press 

Down button: –0.05 MPa per press

The air compressor automatically stops working when the air pressure reaches the set value, and starts working again when the pressure drops 0.2 MPa below the set value.

4. Switch the speed mode

Press the FAST/SILENCE button to switch the operating speed. A speed of 99% indicates high-speed mode, while 50% indicates low-speed mode. 

Recommended mode: FAST

Once the air compressor's current pressure is steady, you can proceed to operate the welding machine.

Note: To stop the air dryer and compressor, first turn off the air compressor and then turn off the air dryer.

More information

Use with MetalFab machines

Use with xTool MetalFab Machines

Set Up, Use, and Power Off the Air Compressore and Air Dryer

Maintenance

Discharge of waste water

Maintenance After Long-term Use