Overview

The Logo Indicator and Knob Indicator on your F1/F1 Lite laser device are designed to provide clear visual clues about the machine’s current status. These indicators use different colors, patterns, and blinking behaviors to convey essential information, such as connectivity, task progress, and error states.
By understanding what each light state means, you can effectively monitor and operate your machine, troubleshoot issues, and ensure optimal performance. This guide provides a detailed explanation of the indicator states to help you interpret them with ease.

Indicator statues

Logo Indicator	Knob Indicator	Machine Status
Solid On	Solid White	The machine is not connected to the software.
	Solid Yellow	The machine is in the process of setting up the network.
	Solid Blue	The machine is connected to the software.
	Solid Green	A task has been completed successfully.
	Solid Purple	The machine is updating its firmware.
	Solid Red	An exception has occurred. Please check the machine for potential issues.
Blinking	Blinking Red (3 Times)	Indicates an invalid operation has been attempted.
Off	Solid Blue	The machine is currently performing a task.
Off	Blinking White (Slowly)	The machine is in sleep mode due to inactivity for 10 minutes.

The indicators provide a quick and intuitive way to monitor the machine's status without needing to access the software.
If you encounter a Solid Red or Blinking Red (3 Times) state, please consult the troubleshooting section or contact xTool Customer Service for assistance.

Preview

Was this page helpful?

0 out of 0 found this helpful

Help Ticket

Use this help ticket to submit your issue. We will respond within 1 business day