Overview
- Damaged (e.g. cracked or broken);
- Exhibiting air bubbles;
- Attached with broken lid hinges.
Important safety & preparation notes
Power safety
Stable positioning
Prequisites
- One (1) 2mm Phillips head screwdriver.
❗ No additional parts are required for this procedure. But please carefully retain all screws and the light shield strip that are removed, as they will be needed for reassembly. Do not discard anything.
How to do it
#1 Removing the light shield strip
- Identify the light shield strip (see image reference).
- Starting from the right side of the strip, carefully peel it off.
- Place the light shield strip aside. Do not discard it.
#2 Removing the lid securing screws
- Locate all the screws securing the transparent lid (you will see them once the strip is removed).
- Use the 2mm Phillips head screwdriver to carefully remove all securing screws.
- Keep all the removed screws in a safe place. Do not discard them.
#3 Removing the transparent lid
Help us improve
If this article or video doesn't effectively assist you in resolving the issue, please let us know by clicking the “No” button in the “Was this page helpful?” section below, and leave your feedback in the pop-up suggestion box. Our knowledge base team will review it and consider it for future updates.
Still need help?
If you need any human assistance, please create a ticket by clicking the “Submit a Ticket” button in the “Help Ticket” section below. Our service team will get back to you in 1 business day via E-mail.
Services & Help
Learn & Education
Copyright © 2025 xTool All Rights Reserved.