Download PDF files (multi-language)

xTool M1 Ultra Electrostatic Mat

English - User Manual	Deutsch - Benutzerhandbuch	Español - Manual de Usuario
Français - Manuel d'utilisation	Italiano - Manuale utente	Nederlands - Gebruikershandleiding
Português - Manual do Usuário	日本語 - 取扱説明書	한국어 - 사용자 매뉴얼
繁體中文 - 使用者手冊	简体中文 - 用户手册

xTool M1 Ultra Electrostatic Protection Sheet

English - Instruction Card	Deutsch - Anleitungskarte	Español - Tarjeta de instrucciones
Français - Fiche d'instructions	Italiano_Scheda delle istruzioni	Nederlands - Instructiekaart
Português - Cartão de instruções	日本語 - 取り扱い説明カード	한국어 - 지시 카드
繁體中文 - 說明卡	简体中文 - 说明卡

xTool M1 Ultra Electrostatic Mat unboxing and first use

Safety first (important)

Read and get familiar with all safety precautions and procedures before using the product. Strictly follow all safety precautions.

• This product can be used only with xTool M1 Ultra for blade cutting, and processing related to the ink module, drawing pens, and foil paper. Do not use it for laser processing.
• Do not perform blade cutting directly on the electrostatic protection sheet or apply excessive cut pressure during blade cutting, as it may damage the electrostatic protection sheet and even the electrostatic film.
• Do not use the electrostatic mat with wet hands or when there is water on its surface, as it may cause damage to the electrostatic mat and even an electrical shock.

List of items

Unbox xTool M1 Ultra Electrostatic Mat and check the items inside the pack. If you find items missing or broken, please contact us for after-sales support.

Electrostatic mat	Electrostatic protection sheet
Sticker	User manual

Meet xTool M1 Ultra Electrostatic Mat

Use xTool M1 Ultra Electrostatic Mat

1. Unscrew the thumb screws for the baseplate of xTool M1 Ultra

2. Place the electrostatic mat into xTool M1 Ultra

3. Tighten the thumb screws for the baseplate of xTool M1 Ultra

4. Place the electrostatic protection sheet on the electrostatic mat

5. Insert the connection cable of the electrostatic mat into the rotary attachment port of xTool M1 Ultra

6. Check whether the electrostatic mat is connected to xTool M1 Ultra

7. Place the material to be processed on the electrostatic protection sheet

8. Enable electrostatic adsorption

9. For an uneven surface, flatten the material with your hands; for warped edges, attach stickers to secure them

10. Disable electrostatic adsorption

💡 Note: When [Auto control] in [Device settings] > [Accessories info] is enabled, electrostatic adsorption will be disabled automatically after processing.

11. Remove the electrostatic mat

Maintenance

• Do not store the electrostatic mat in a damp environment.
• To prevent damage to the electrostatic film, ensure that you place an electrostatic protection sheet on the electrostatic mat before using blade cutting.

FAQ

1. What types of materials can be secured by the electrostatic mat for blade cutting?
   The electrostatic mat is suitable for securing paper and certain types of leather during blade cutting. It is not suitable for fabrics or wood boards. The mat's ability to hold leather can vary according to the leather's surface texture.
2. Can the electrostatic protection sheet be cleaned?
   Yes, when the power is off, the electrostatic protection sheet can be cleaned by gently wiping with a damp cloth. After wiping, allow it to air-dry in a well-ventilated area. However, do not rub the sheet when you clean it.
3. Why does the electrostatic film turn yellow or black?
   After being used for a long time, the adhesive on the back of the electrostatic film may turn yellow or black. This is a normal occurrence and does not affect the use of the electrostatic mat.